Dugromacolor

Additive 3 color: Beam-splitter, substandard

1 Image

Supercinecolor / Natural Color

Subtractive 3 color: Color separation, duplitized film, third layer added

Eastman Multilayer Stripping Film / Kodak Stripping Film

Subtractive 3 color: Stripping film

Alfacolour / Alfacolor

Subtractive 2 color: Bi-pack, duplitized film

Colorvision

Additive 3 color: Beam-splitter

Cinefotocolor

Subtractive 2 color: Bi-pack

Americolor

Subtractive 2 color: Bi-pack, duplitized

Trucolor 2 color

Subtractive 2 color: Bi-pack, double-coated with dye couplers
“By the 1940s, most of the two-colour subtractive processes, apart from Cinecolor, were obsolete. The widespread use of the high-quality Technicolor process showed up the serious deficiencies in the simpler methods. The only significant new ...

British Tricolour / Dufaychrome

Subtractive 3 color: Beam-splitter, three-strip, multiple printing

19 Images in 3 Galleries

Fullcolor

Subtractive 2 colors: Bi-pack, duplitized film

Telco color subtractive 2 color

Subtractive 2 color: Split optics, side by side, duplitized film

1 Image

Dunning Color

Subtractive 3 color: Beam-splitter, double-coated

Hirlicolor

Subtractive 2 color: Bi-pack

2 Images

Cosmocolor

Additive 2 color: Beam-splitter, double-coated

2 Images

Dascolour

Subtractive 2 color: Bi-pack, double-coated print

1 Image

Harmonicolor

Subtractive 2 color: Bi-pack, double-coated
“Harmonicoior was developed by French chemist Maurice Combes. It was first formally demonstrated in London by Harmonicoior Films Ltd, of 4 Great Winchester Street, on the 23 March 1936 at the Curzon Soho with the film Talking Hands, produced at ...

Cinemacolor

Additive 2 color: Beam-splitter, sub-standard vertical

2 Images

Vericolor

Subtractive 2 color: unknown

40 Images

Spectracolor (= British version of Ufacolor)

Subtractive 2 color: Bi-pack, mordant toning

Rouxcolor 2 color / Cineoptichrome

Additive 2 color: Beam-splitter

2 Images

Chemicolor / Ufacolor in GB

Subtractive 2 color: Bi-pack, mordant toning
“Chemicoior was the name under which the German Ufacolor Process was marketed in Britain. Ufacolor was also marketed under the name Spectracolor. The process used Agfa bipack negatives loaded with the emulsion sides facing and separated by a ...

9 Images in 2 Galleries

Cinecolor (subtractive 2 color)

Subtractive 2 color: Bi-pack, duplitized film

93 Images in 9 Galleries

Magnacolor

Subtractive 2 color: Bi-pack, double-coated
“An American two-colour subtractive process still worked by the Consolidated Film Industries division of Republic Pictures Corporation. This concern was licensed by the owners of the “Prizma” patents, which it will be remembered was ...

23 Images in 2 Galleries

Rota Farbenfilm

Subtractive 2 color: Bi-pack, mordant toning

13 Images in 2 Galleries

Coloratura

Subtractive 2 color: Bi-pack, dupitized positive, toned
“Coloratura. This is the process of Pathé Exchange at Bound Brook, N. J. Negatives are made by the bi-pack method. Prints are made on double-sided film and are dye-toned on one side and metallic-toned on the other. The double-sided film, ...

Magnachrome

Additive 2 color: Bi-pack, half-size

Russian two-color system

Subtractive two color

1 Image

Ufacolor

Subtractive 2 color: Bi-pack, mordant toning

136 Images in 7 Galleries

Chimicolor

Subtractive 3 color: Beam-splitter, double-coated film, mordant toning

2 Images

Audibert

Addtive 3 color: Beam-splitter, mosaic screen, 65 mm

3 Images

Allfarbenfilm

Additive 3 color: Beam-splitter, substandard

Photocolor

Subtractive 2 color: Beam-splitter, double-coated

42 Images

Sennett Color

Subtractive 2 color: Bi-pack, double coated, toned
“Public showings of the work done at this plant in Hollywood have been given to Los Angeles audiences. The release prints are made on double sided film. Both sides are developed at one time and then toned red on one side and bluegreen on the ...

18 Images in 1 Gallery

Brewster

Subtractive 2 or 3 color: Perforated mirror as beam-splitter, duplitized film
“The Brewster Process. (U.S.P. 1,752,477. 1930-) Camera. – P. D. Brewster, an American inventor, who was one of the first to apply the bipack system to colour cinematography, has a number of patents to his credit covering various cameras and ...

52 Images in 1 Gallery

Raycol

Additive 2 color: Beam-splitter, sawn-off lens

13 Images in 1 Gallery

Sirius

Subtractive 2 color: Beam-splitter, double-coated
“The Dutch Sirius Color process (1929) used a camera with a beamsplitting system behind the lens to expose a single film, the film passing through two gates at right angles to each other. The double-coated print film was dye-toned. The process ...

142 Images in 4 Galleries

Agfa bipack films

Subtractive 2 color: Bi-pack
AGFA BIPACK FILM The front film is orthochromatic and sensitive, therefore, to green and blue. The rear film is panchromatic and records red-orange only, there being a red-orange filter on the orthochromatic emulsion. In fact, this is a bipack of the ...

11 Images in 1 Gallery

Harriscolor

Subtractive 2 color: Beam-splitter, single-coated
“Harriscolor In this method as in other methods of color photography, independent color value negatives are first obtained. The Harriscolor process can employ one of the following two methods: Either a camera wherein the dividing light prisms ...

3 Images

Splendicolor

Subtractive 3 color: Beam-splitter, double-coated film, bichromated gelatin, Pinatype

Multicolor

Subtractive 2 color: Bi-pack, duplitized
“In the Multicolor (two-color) subtractive process, two negative films are run simultaneously through any standard camera with their emulsion surfaces in contact. The front negative is orthochromatic, with the surface layer dyed orange-red to ...

72 Images in 6 Galleries

Color Cinema Corporation

Subtractive 2 color: Bi-pack, double-coated

2 Images

Busch Farbenfilm

Additive 2 color: Beam-splitter, red-green

5 Images in 1 Gallery

Auto Natural Color / Bernardi

Additive 3 color: Beam-splitter, substandard

Technic-Colour

Subtractive 2 color: Beam-splitter, duplitized

Cinecolor additive 2 color / Cinecolour

Additive 2 color: Beam-splitter, substandard

2 Images

Horst

Additive 3 color: Beam-splitter, 65 mm negative

4 Images in 1 Gallery

Technicolor No. II

Subtractive 2 color: 2 toned films cemented

The first subtractive 2 color process introduced by Technicolor captured the incoming light through a beam splitter with red and green filters also. However, in contrast to the first Technicolor process, the two b/w images were recorded on one negative strip. This was achieved by the pull-down of two frames simultaneously, a process that required the double speed in the camera. These two frames were arranged in pairs, whereby the green record was inverted up-side down (see image).

133 Images in 8 Galleries

Colorcraft

Additive 2 color: Bi-pack, double-coated

21 Images in 1 Gallery

Zoechrome

Subtractive 3 color: Multi-layer printing

16 Images in 1 Gallery

Cinekrome

Additive 2 color: Beam-splitter

Prizma II

Subtractive 2 color: Toning on double coated film
“In its final form Prizma made use of duplitized positive film. As in previous Prizma systems, the original negatives were alternate frame sequential exposures. The Prizma negative was printed on both sides of the positive film in a special ...

399 Images in 14 Galleries

Douglass Color No. 2

Subtractive 2 color: Separations, multi-layer prints
“Douglass Color No. 2 (1919). The two negatives of the Douglass Color system No. 1 were printed on a positive. In this updated version of the process, rather than projecting the frames through red and green filters, both latent images were ...

Polychromide

Subtractive 2 color: Beam-splitter, later bi-pack, mordant dye
“Polychromide, a two-color subtractive process invented in 1918 by Aron Hamburger, achieved limited commercial success overseas, and was occasionally employed in England as late as 1933. Originally an orthochromatic and a panchromatic negative were ...

66 Images in 2 Galleries

Talkicolor

Additive 2 color: Alternately stained
“Two-colour additive process Talkicolor was developed by Percy James Pearce along with Dr Anthony Bernardi who was also involved in the development of Raycol. The process was funded mainly by the author Elinor Glyn through her company Elinor ...

3 Images in 1 Gallery

Brewster

Subtractive 2 color: Perforated mirror as beam-splitter, duplitized film
“Following the premises of one of William Friese-Greene’s systems, this two-colour subtractive process required that two reels of film be printed in parallel through a lens fitted with a prism that split light in two directions, through red ...

Kodachrome Two-color 1915, after 1930 renamed Fox Nature Color

Subtractive 2 color process: Beam-splitter, double-coated film

The Kodachrome process was invented in 1913 by John G. Capstaff for still photography and subsequently adapted to motion pictures. For the process two frames were advanced simultaneously, one located above the other. The light passed either through two lenses or through a beam-splitter, fitted with red and green filters. The release print was exposed through a beam-splitter whereby the alternate frames were projected onto either side of double-coated stock. After development by a usual b/w process, the film was tanned to harden the exposed areas. The soft areas were dyed red-orange and blue-green respectively.

350 Images in 12 Galleries

Colorgraph / Cinecolorgraph

Subtractive 2 color: Beam-splitter, double-coated film
“The principle of the subtractive colour process was described first by Louis Ducos du Hauron in 1868. Although eminently suitable for colour motion pictures, the principle could not be applied until means were found of producing several colour ...

1 Image

Audibert

Additive 3 color: Prism
“R. Berthon and M. Audibert patented a method of obtaining a virtual image by means of an anterior lens and prisms or mirrors. This idea was further improved upon in E.P. 17,023, 1913. In F.P. 458,040 Audibert proposed to use a negative front lens ...

2 Images

Procédé Colombier

Subtractive 3 color: Tri-pack
“M. F. de Colombier appears to have been the first to suggest the application of this system to cinematography, and like so many French patents it is a little indefinite in phraseology. Three films were employed representing the same view and ...

Prism

Additive 3 color: Prism

1 Image

Jumeaux/Davidson

Additive 3 color: Prism

2 Images

Monopack stripping

Subtractive 3 color: Monopack, stripping, still photography
“To offset the possible effects of poor contact between the various members of the tripack, J. H. Smith coated the emulsions directly one on top of the other, but with an insulating layer of collodion between them. In this manner there was ...

1 Image

Bi-pack

Subtractive 2 color: Bi-pack, still photography
A. Gurtner (Eng. P. 7924/03; U.S.P. 730454), used a front element that was sensitive only to the blue, and a rear element that was sensitive up to but not including the red. He was the first person to suggest that the two films or plates be placed ...

1 Image