Eastman Wash-Off Relief

Subtractive 3 color: dye imbibition process, still photography
“In October 1935 Eastman Kodak Company introduced Eastman Wash-Off Relief. For years the company had been producing matrices and blank films for Technicolor motion pictures, and Kodak engineers were familiar with the requirement of the dye ...

1 Image

Ozotype

Subtractive 3 color: pigment process, still photography

Dymat Process

Subtractive 3 color: Dye transfer, Super-8

Fuji Dyecolor

Subtractive 3 color: dye imbibition process, still photography
“Around 1975, Fuji Photo Film Company introduced Fuji Dyecolor, a dye imbibition printing service available only in Japan. A feature of the process was that the transfer of the dyes was done automatically in a special rotary machine developed ...

Technicolor No. III

Subtractive 2 color: Beam-splitter, dye transfer

The third Technicolor process used the same camera as process no. II to combine a pair of frames of the red and green record respectively on the b/w negative (see image). In contrast to the former process, however, the two images were printed on one side of the positive by the dye transfer or imbibition process.

1298 Images in 38 Galleries

Technicolor No. IV: Three-strip

Subtractive 3 color: Color separation, beam-splitter, dye transfer
With the fourth Technicolor process the company dominated the market for color films from the mid-1930s to the 1950s. In a special camera, three b/w negative films were exposed through a beam-splitter that consisted of two prisms to form a cube. One ...

1887 Images in 65 Galleries

Technichrome

Subtractive 2 color: Dye transfer, 2 color bi-pack, 3 color printing

4 Images in 1 Gallery

Technicolor No. V: Dye transfer prints from chromogenic negative

Subtractive 3 color: Dye transfer
With the introduction of the chromogenic Eastmancolor negative/positive process it became possible to shoot with a normal one-strip camera. Three b/w color separations were produced from the Eastmancolor negative and printed by dye transfer on blank ...

2181 Images in 41 Galleries

Chromolithography

Applied colors: printing
Widely used in print media around 1900, the chromolithographic printing process was first adapted for the Laterna Magica and then utilized to produce early animated films primarily aimed at children. These films were usually very short ...

119 Images in 3 Galleries

Traube / Uvachrome

Subtractive 3 color: Mordanting, dye transfer, wash-off relief, still photography
“In 1916 Traube found that copper toning baths3 were especially suitable for dye mordanting and patented the Uvachrome process.4 At the time, Germany was at war with most of Europe, and little commercial progress was made until the end of ...

3 Images

Uvatype

Subtractive 3 color: dye imbibition process, still photography
“Uvatype was yet another variation of the dye imbibition process, introduced by the Uvachrome Company of Germany in 1929 (Fig. 4.12). Its inventor, the German chemist Arthur Traube, worked diligently to improve the then-available imbibition ...

1 Image

Autotype Wet Carbon

Subtractive 3 color: pigment process, still photography
“Introduced by the Autotype Company in 1944, the Autotype Wet Carbon Process was a variant of the traditional carbon process with novelty wet-printing pigment papers. Considerable time was saved when printing with this material as the pigment ...

ArchivalColor

Subtractive 4 color: pigment process, still photography
“In the early 1980s photographers frustrated by the poor stability of dye coupling materials started to experiment with pigment processes. Among them was Charles Berger, a California-based fine art photographer who, in 1982, developed a modern ...

2 Images

UltraStable Color Systems

Subtractive 4 color: pigment process, still photography
“Berger then started to work with the master carbro printer Richard Newmark Kauffman (1916−1998), and together they founded Ultrastable Color Systems, Inc. In 1992 they introduced presensitized UltraStable material for four-color carbon ...

1 Image

Hydrotypie / Hydrotype

Subtractive 3 color: dye transfer, still photography
“In the imbibition process, a dye image is transferred from a gelatin relief image to a receiving layer made either of paper or film. Charles Cros described this method of ‘hydrotypie’ transfer printing in 1880 and suggested it ...

Colorsnap, Colorol

Subtractive 3 color: dye imbibition process, still photography
“In 1929 the London firm Colour Snapshots Limited introduced Colorsnap, a printing service based on the dye imbibition process for a tripack roll film called Colorsnap and manufactured by Ilford Ltd. (Monopolies Commission 1966).11 The tripack ...

1 Image

Defender Pan-Chroma-Relief

Subtractive 3 color: dye imbibition process, still photography
“In 1942 Defender Photo Supply Company of Rochester, New York, introduced a panchromatic matrix film called Pan-Chroma-Relief Film, which simplified the making of dye imbibition prints from original Kodachrome or Ansco Color transparencies.20 ...

Vivex

Subtractive 3 color: pigment process, still photography
“Vivex prints were introduced by Color Photographs Limited of London in 1928. One of the most important features of this printing method, invented by Douglas Arthur Spencer (1902–1980), was the introduction in 1929 of cellophane, instead of ...

1 Image

Dufaytissue

Subtractive 3 color: pigment process, still photography
“Dufaytissue materials, marketed by Dufay-Chromex Limited of London between 1941 and 1948, resembled Belcolor and were used to produce color prints by contact. After they had been sensitized and dried, the pigment films were exposed by contact ...

1 Image

Sanger-Shepherd

Subtractive 3 color: dye imbibition process, still photography
“In 1900 Edward Sanger-Shepherd (ca. 1869−1927), a London scientific instrument maker, started to offer complete outfits for making natural color lantern slides with a dye imbibition printing method that became known as the Sanger-Shepherd ...

3 Images

1 Image

Hicrography / Hicrome

Subtractive 3 color: dye imbibition process, still photography
“In 1915 the company launched a hybrid dye imbibition color printing system called Hicrography.9 From the separation negatives, positive impressions were made through the base on the presensitized dichromated film (Hicro Film), which also ...

1 Image

Polychrome

Subtractive 3 color: dye mordanting and silver toning process, still photography
“In 1932 Frederic Eugene Ives published details of his Polychrome printing system for making three-color paper prints or transparencies from two separation negatives made through a red and a green-blue filter. The process, described by its ...

1 Image

Jos-Pé

Subtractive 3 color: dye imbibition process, still photography
“Invented by G. Koppmann and introduced in Hamburg in 1924 by the German financier Josef-Peter Welker, from whom the product took its name (Wall and Jordan 1940: 330), Jos-Pé was a complete color system that included a one-exposure camera, ...

1 Image

Belcolor

Subtractive 3 color: pigment process, still photography
“Introduced in the mid-1930s by George Murphy, Inc., of New York City, Belcolor was considered one of the simplest ways to obtain color transparencies, as it required no special equipment or expert technique and could be used successfully ...

Autotype Trichrome Carbro

Subtractive 3 color: pigment process, still photography
“As in previous versions of the process, pigment papers were soaked in a sensitizing bath and then squeegeed firmly onto the surface of wet bromide prints to harden the pigmented gelatin in proportion to the amount of silver contained in the ...

1 Image

Carbro-Chromatone

Subtractive 3 color: pigment process, still photography
“References to Carbro-Chromatone prints are sometimes found in the literature on early color photography. These prints were made using a combination of the two processes they were named after. The method was described by Harlan L. Baumbach in ...

Raylo

Subtractive 3 color: pigment process, still photography
“Raylo was a material developed by Hiram Codd Joseph Deeks (1880−1952) of the American Raylo Corporation, New York. It was introduced in 1922 for a printing service for users of the Raylo Camera, a one-shot camera that made three negatives ...

1 Image

Triadochrome

Subtractive 3 color: dye mordanting and silver toning process, still photography
“After the war, in 1921, J. F. Shepherd introduced in England a printing method called the Triadochrome Color Process, which was very similar to Hamburger’s Polychromide.10 To make a print, a cyan impression obtained from an iron-toned ...

Crawford Flexichrome 1940–1942, after 1949 Kodak Flexichrome

Subtractive 3 color: hybrid dye imbibition process, still photography
“In the 1940s a product called Crawford Flexichrome appeared on the market. It allowed photographers to obtain prints or transparencies in full color by simply applying dyes of various colors by hand to a gelatin relief image.16 Results ...

1 Image