“References to Carbro-Chromatone prints are sometimes found in the literature on early color photography. These prints were made using a combination of the two processes they were named after. The method was described by Harlan L. Baumbach in ...

“In 1939 Thomas S. Curtis (1889–1964) proposed Orthotone, a dye imbibition printing method that was primarily a variation of the widely used Eastman Wash-Off Relief. Orthotone offered its practitioners complete control on the contrast or ...

“In the 1940s a product called Crawford Flexichrome appeared on the market. It allowed photographers to obtain prints or transparencies in full color by simply applying dyes of various colors by hand to a gelatin relief image.16 Results ...

“Dufaytissue materials, marketed by Dufay-Chromex Limited of London between 1941 and 1948, resembled Belcolor and were used to produce color prints by contact. After they had been sensitized and dried, the pigment films were exposed by contact ...

“In 1942 Defender Photo Supply Company of Rochester, New York, introduced a panchromatic matrix film called Pan-Chroma-Relief Film, which simplified the making of dye imbibition prints from original Kodachrome or Ansco Color transparencies.20 ...

“Introduced by the Autotype Company in 1944, the Autotype Wet Carbon Process was a variant of the traditional carbon process with novelty wet-printing pigment papers. Considerable time was saved when printing with this material as the pigment ...

“Kodak Dye Transfer materials were introduced by Eastman Kodak Company in February 1946 and replaced Eastman Wash-Off Relief. Principal improvements over the previous material included a simplified registration procedure, more rapidly ...

With the introduction of the chromogenic Eastmancolor negative/positive process it became possible to shoot with a normal one-strip camera. Three b/w color separations were produced from the Eastmancolor negative and printed by dye transfer on blank ...

“In 1951, when pigment processes were falling into disfavor, Pierre Fresson (1904–1983) of Atelier Fresson developed Fresson Quadrichromy, a four-color printing method based on the monochrome direct carbon process (charbon-satin) that had ...

“In 1977 Light Impressions Corporation of Rochester, New York, introduced Kwik-Print, a contact speed color printing material. This was a modification of the Kwik-Proof graphic arts proofing system made by Direct Reproductions Corporation of ...

“In the early 1980s photographers frustrated by the poor stability of dye coupling materials started to experiment with pigment processes. Among them was Charles Berger, a California-based fine art photographer who, in 1982, developed a modern ...

“Berger then started to work with the master carbro printer Richard Newmark Kauffman (1916−1998), and together they founded Ultrastable Color Systems, Inc. In 1992 they introduced presensitized UltraStable material for four-color carbon ...

“Also during the 1990s, William (Bill) Nordstrom started to experiment with a carbon process called Agfa-Proof, a four-color proprietary prepress color proofing system. He founded the EverColor Corporation in El Dorado Hills, California, in ...

In 1994, Technicolor announced the development of an enhanced dye-transfer process. This process became effective in  June 1997. There was no official denomination, so “Technicolor No. VI” is not to be confused with statements from the mid ...

“In 1998 Racey Gilbert purchased Polaroid’s stock of pigment films and opened Ataraxia Studio in Bensalem, Pennsylvania, to make high-quality collectors’ carbon prints. Under the direction of Gérard Niemetzky, the studio produced ...