“In 1905 Thomas Manly (d. 1932) of London introduced the Ozobrome process,21 which was a modification of his earlier Ozotype, patented in 1898.22 The process was based on a carbon printing method proposed in 1873 by Auguste Marion (1835–1917) ...

“In the imbibition process, a dye image is transferred from a gelatin relief image to a receiving layer made either of paper or film. Charles Cros described this method of “hydrotypie” transfer printing in 1880 and suggested it ...

“In 1932 Frederic Eugene Ives published details of his Polychrome printing system for making three-color paper prints or transparencies from two separation negatives made through a red and a green-blue filter. The process, described by its ...

“Raylo was a material developed by Hiram Codd Joseph Deeks (1880−1952) of the American Raylo Corporation, New York. It was introduced in 1922 for a printing service for users of the Raylo Camera, a one-shot camera that made three negatives ...

“In 1900 Edward Sanger-Shepherd (ca. 1869−1927), a London scientific instrument maker, started to offer complete outfits for making natural color lantern slides with a dye imbibition printing method that became known as the Sanger-Shepherd ...

The third Technicolor process used the same camera as process no. II to combine a pair of frames of the red and green record respectively on the b/w negative (see image). In contrast to the former process, however, the two images were printed on one side of the positive by the dye transfer or imbibition process.

With the fourth Technicolor process the company dominated the market for color films from the mid-1930s to the 1950s. In a special camera, three b/w negative films were exposed through a beam-splitter that consisted of two prisms to form a cube. One ...

With the introduction of the chromogenic Eastmancolor negative/positive process it became possible to shoot with a normal one-strip camera. Three b/w color separations were produced from the Eastmancolor negative and printed by dye transfer on blank ...

In 1994, Technicolor announced the development of an enhanced dye-transfer process. This process became effective in  June 1997. There was no official denomination, so “Technicolor No. VI” is not to be confused with statements from the mid ...

“In 1916 Traube found that copper toning baths3 were especially suitable for dye mordanting and patented the Uvachrome process.4 At the time, Germany was at war with most of Europe, and little commercial progress was made until the end of ...

“After the war, in 1921, J. F. Shepherd introduced in England a printing method called the Triadochrome Color Process, which was very similar to Hamburger’s Polychromide.10 To make a print, a cyan impression obtained from an iron-toned ...

“Berger then started to work with the master carbro printer Richard Newmark Kauffman (1916−1998), and together they founded Ultrastable Color Systems, Inc. In 1992 they introduced presensitized UltraStable material for four-color carbon ...

“Uvatype was yet another variation of the dye imbibition process, introduced by the Uvachrome Company of Germany in 1929 (Fig. 4.12). Its inventor, the German chemist Arthur Traube, worked diligently to improve the then-available imbibition ...

“Vivex prints were introduced by Color Photographs Limited of London in 1928. One of the most important features of this printing method, invented by Douglas Arthur Spencer (1902–1980), was the introduction in 1929 of cellophane, instead of ...