“Duxochrome, introduced around 1930 by the Johannes Herzog Company of Bremen, Germany, combined the colored gelatin layers of pigment processes with the tanning development procedure of dye imbibition. Exposures from three separation negatives ...

“Dufaytissue materials, marketed by Dufay-Chromex Limited of London between 1941 and 1948, resembled Belcolor and were used to produce color prints by contact. After they had been sensitized and dried, the pigment films were exposed by contact ...

“In 1942 Defender Photo Supply Company of Rochester, New York, introduced a panchromatic matrix film called Pan-Chroma-Relief Film, which simplified the making of dye imbibition prints from original Kodachrome or Ansco Color transparencies.20 ...

“In 1939 Thomas S. Curtis (1889–1964) proposed Orthotone, a dye imbibition printing method that was primarily a variation of the widely used Eastman Wash-Off Relief. Orthotone offered its practitioners complete control on the contrast or ...

“In the 1940s a product called Crawford Flexichrome appeared on the market. It allowed photographers to obtain prints or transparencies in full color by simply applying dyes of various colors by hand to a gelatin relief image.16 Results ...

“Around 1940, Condax-Speck, Inc., of New York started to market dyes and mordant for the Condax-Dytrol system of dye imbibition printing (Fig. 4.19). The system, developed by company owners Louis M. Condax (1897–1971) and Robert P. Speck, ...

“In 1929 the London firm Colour Snapshots Limited introduced Colorsnap, a printing service based on the dye imbibition process for a tripack roll film called Colorsnap and manufactured by Ilford Ltd. (Monopolies Commission 1966).11 The tripack ...

Widely used in print media around 1900, the chromolithographic printing process was first adapted for the Laterna Magica and then utilized to produce early animated films primarily aimed at children. These films were usually very short ...

“References to Carbro-Chromatone prints are sometimes found in the literature on early color photography. These prints were made using a combination of the two processes they were named after. The method was described by Harlan L. Baumbach in ...

“Introduced in the mid-1930s by George Murphy, Inc., of New York City, Belcolor was considered one of the simplest ways to obtain color transparencies, as it required no special equipment or expert technique and could be used successfully ...

“Introduced by the Autotype Company in 1944, the Autotype Wet Carbon Process was a variant of the traditional carbon process with novelty wet-printing pigment papers. Considerable time was saved when printing with this material as the pigment ...

“As in previous versions of the process, pigment papers were soaked in a sensitizing bath and then squeegeed firmly onto the surface of wet bromide prints to harden the pigmented gelatin in proportion to the amount of silver contained in the ...

“Autotype Dyebro Introduced around the same time as Colorsnap and Uvatype, Autotype Dyebro combined the three-color carbro and dye imbibition processes. The method was invented by Owen Wheeler (1859–1932) and commercialized by the Autotype ...

“In 1998 Racey Gilbert purchased Polaroid’s stock of pigment films and opened Ataraxia Studio in Bensalem, Pennsylvania, to make high-quality collectors’ carbon prints. Under the direction of Gérard Niemetzky, the studio produced ...

“In the early 1980s photographers frustrated by the poor stability of dye coupling materials started to experiment with pigment processes. Among them was Charles Berger, a California-based fine art photographer who, in 1982, developed a modern ...