“In 1942 Defender Photo Supply Company of Rochester, New York, introduced a panchromatic matrix film called Pan-Chroma-Relief Film, which simplified the making of dye imbibition prints from original Kodachrome or Ansco Color transparencies.20 ...

“In 1929 the London firm Colour Snapshots Limited introduced Colorsnap, a printing service based on the dye imbibition process for a tripack roll film called Colorsnap and manufactured by Ilford Ltd. (Monopolies Commission 1966).11 The tripack ...

“In the imbibition process, a dye image is transferred from a gelatin relief image to a receiving layer made either of paper or film. Charles Cros described this method of ‘hydrotypie’ transfer printing in 1880 and suggested it ...

“Berger then started to work with the master carbro printer Richard Newmark Kauffman (1916−1998), and together they founded Ultrastable Color Systems, Inc. In 1992 they introduced presensitized UltraStable material for four-color carbon ...

“In the early 1980s photographers frustrated by the poor stability of dye coupling materials started to experiment with pigment processes. Among them was Charles Berger, a California-based fine art photographer who, in 1982, developed a modern ...

“Introduced by the Autotype Company in 1944, the Autotype Wet Carbon Process was a variant of the traditional carbon process with novelty wet-printing pigment papers. Considerable time was saved when printing with this material as the pigment ...

“Uvatype was yet another variation of the dye imbibition process, introduced by the Uvachrome Company of Germany in 1929 (Fig. 4.12). Its inventor, the German chemist Arthur Traube, worked diligently to improve the then-available imbibition ...

“In 1916 Traube found that copper toning baths3 were especially suitable for dye mordanting and patented the Uvachrome process.4 At the time, Germany was at war with most of Europe, and little commercial progress was made until the end of ...

Widely used in print media around 1900, the chromolithographic printing process was first adapted for the Laterna Magica and then utilized to produce early animated films primarily aimed at children. These films were usually very short ...

The third Technicolor process used the same camera as process no. II to combine a pair of frames of the red and green record respectively on the b/w negative (see image). In contrast to the former process, however, the two images were printed on one side of the positive by the dye transfer or imbibition process.

With the fourth Technicolor process the company dominated the market for color films from the mid-1930s to the 1950s. In a special camera, three b/w negative films were exposed through a beam-splitter that consisted of two prisms to form a cube. One ...

With the introduction of the chromogenic Eastmancolor negative/positive process it became possible to shoot with a normal one-strip camera. Three b/w color separations were produced from the Eastmancolor negative and printed by dye transfer on blank ...

“Around 1975, Fuji Photo Film Company introduced Fuji Dyecolor, a dye imbibition printing service available only in Japan. A feature of the process was that the transfer of the dyes was done automatically in a special rotary machine developed ...

“In October 1935 Eastman Kodak Company introduced Eastman Wash-Off Relief. For years the company had been producing matrices and blank films for Technicolor motion pictures, and Kodak engineers were familiar with the requirement of the dye ...