Donisthorpe

Additive two color process: rotating filters and toning
The film is recorded through alternating red and green filters, creating two color separations. After development, the print is placed in two alternating dye-baths, toning the blacks green and the whites red. Additionally, a black-and-white copy is ...

Iriscolor

Subtractive 3 color: Beam-splitter camera, imbibition printing
Similar to Technicolor, the Iriscolor process needed a special beam-splitter camera for exposing three black-and-white negatives on Kodak film stock. These negatives were used for imbibition printing. Between 1940 and 1942, Tobis Tonbild-Syndikat AG ...

Gilmore Color

Additive 2 color: Rotary filter
“Gilmore’s two-color additive process was based on a patent granted to F. E. Ives in 1918. A unique optical system exposed two images in pairs, and quarter-turned them lengthwise side by side on standard 35 mm film stock. One of the images was ...

1 Image

Lee and Turner

Additive 3 color: Rotary filter
“Frederick Marshall Lee, of Walton, and Edward Raymond Turner, of Hounslow, to whom is usually accorded the credit of achieving the first practical results in additive projection. Their experimental work was financed by Charles Urban, a ...

16 Images in 1 Gallery

Crosene Process

Additive 4 color: Bi-pack, substandard

Lippmann

Direct color photography: Interference, still photography
“In 1891, Professor Gabriel Lippmann demonstrated to the French Académie des Sciences interference colour photographs of the spectrum and of stained glass windows, taken by a modification of Wiener’s method. An exceedingly fine grained, ...

5 Images

3M Posi-Tone

Subtractive 3 color: dye destruction process, silver dye-bleach, still photography
“In 1956, after the failure of the French venture, Gaspar resumed his own production of printing materials and chemicals (Koshofer 1981a). In the late 1950s he entered into an agreement with 3M Company of St. Paul, Minnesota, to explore the ...

Predecessor of Kinemacolor

Additive 2 color: Rotary filter
“Then we come upon the name of George Albert Smith, F.R.A.S., of Laboratory Lodge, Roman Crescent, Southwick, Brighton, who in E.P. 26,671, of 1906, patented the method which eventually was commercialized as Kinemacolor. In this patent he ...

Kinemacolor

Additive 2 color: Rotary filter

Kinemacolor was an additive process operated with alternating red and green filters that were applied to the shutter in front of the camera and in front of the projector. With at least 32 fps the frame rate was double the minimal frame rate of 16 fps. Time parallax with small differences between the red and green record resulted in color fringes that became visible when objects or scenes were moving.

13 Images in 3 Galleries

Hirlicolor

Subtractive 2 color: Bi-pack

2 Images

Belcolor

Subtractive 3 color: pigment process, still photography
“Introduced in the mid-1930s by George Murphy, Inc., of New York City, Belcolor was considered one of the simplest ways to obtain color transparencies, as it required no special equipment or expert technique and could be used successfully ...

Agfacolor lenticular / Agfacolor Linsenrasterfilm

Additive 3 color: Lenticular screen
The basic idea of the lenticular film was developed by the German Raphaël Liesegang in 1896 and applied to still photography by the French Rodolphe Berthon in 1908. The lenticular process applies tiny cylindrical lenses embossed on the film support ...

15 Images

Gualtierotti or Cicona e Gualtierotti

Additive two-color: optical system, filters, 64mm negative.
Unlike other additive systems invented in previous years, Gualtierotti tried to avoid the phenomenon of chromatic aberration inherent in the use of multiple lenses or the creation of successive separation records. The proposed solution was based on ...

1 Image

Autotype Trichrome Carbro

Subtractive 3 color: pigment process, still photography
“As in previous versions of the process, pigment papers were soaked in a sensitizing bath and then squeegeed firmly onto the surface of wet bromide prints to harden the pigmented gelatin in proportion to the amount of silver contained in the ...

1 Image

Chromart Simplex

Subtractive 2 color: Chromogenic monopack

Chromart Tricolor

Subtractive 3 color: Chromogenic monopack

Carbro-Chromatone

Subtractive 3 color: pigment process, still photography
“References to Carbro-Chromatone prints are sometimes found in the literature on early color photography. These prints were made using a combination of the two processes they were named after. The method was described by Harlan L. Baumbach in ...

Rotocolor

Additive 2 color: Rotary filter
“The Rotocolor process was an additive system for color cinematography. The process was announced in 1931 by H. Muller. According to an article in Film Daily, April 12, 1931, and The Motion Picture Herald, April 11, 1931, the process consisted of ...

Urban-Joy Process, improvement of Kinemacolor, later called Kinekrom

Additive 2 color: Rotary filter
“In the design of apparatus Urban was assisted after 1905 by Henry W. Joy. The Urban-Joy perforator appeared in 1906. The Urban-Joy anti-firing device, a shutter to prevent the firing of inflammable film when projectors broke down, was another ...

Technicolor No. I

Additive 2 color: Beam-splitter

During the capturing of the film a beam-splitter in combination with filters in the camera divided the incoming light into a red and a green separation negative on black-and-white stock. When projected in the cinema the two images were combined simultaneously by additive mixture through corresponding red and green filters into one picture consisting of red and green colored light. The reduction of the whole color range to two colors (and their additive combinations) was necessary because of the complex optical arrangement.

6 Images in 1 Gallery

Isensee

Additive 3 color: Rotary filter
“The first patent that has been found was granted to H. Isensee and he placed in front of the lens, both in taking and projection, a rotary shutter with three 120 degrees sectors in the usual colors.” (Wall, E.J. (1925): The History of ...

2 Images

Orthochromatic stock

b/w photography: Orthochromatic b/w stock
“In 1873 Dr Vogel discovered that by adding dyes to the sensitive material, its sensitivity could be extended, so that it would record green as well as blue. The new ‘orthochromatic’ plates were available commercially from 1882. The ...

2 Images

Sensitizing theory

Color theory
“Dr. H. W. Vogel, the discoverer of colour sensitizers, made three-colour photography possible, and has been the first to recognise the relation between colour sensitiveness of plate and printing colour in the following principle made known in ...

Harriscolor

Subtractive 2 color: Beam-splitter, single-coated
“Harriscolor In this method as in other methods of color photography, independent color value negatives are first obtained. The Harriscolor process can employ one of the following two methods: Either a camera wherein the dividing light prisms ...

3 Images

British Tricolour / Dufaychrome

Subtractive 3 color: Beam-splitter, three-strip, multiple printing

19 Images in 3 Galleries

Crawford Flexichrome

Subtractive 3 color: hybrid dye imbibition process, still photography
“In the 1940s a product called Crawford Flexichrome appeared on the market. It allowed photographers to obtain prints or transparencies in full color by simply applying dyes of various colors by hand to a gelatin relief image.16 Results ...

1 Image

Color theory

Additive 3 color: Additive 3 color, still photography
“In a lecture on the theory of three primary colors, given at the Royal Institution of Great Britain on May 17, 1861, Maxwell presented the first demonstration of a photograph in color. According to the records of that meeting (Maxwell, 1890c, ...

1 Image

Szczepanik

Additive 3 color: Moving lenses
“The process of J. Szczepanik in 1925 was impracticable. He used a non-intermittent camera having a chain of eighteen lenses moving together with the film behind a collimating lens, three pictures being simultaneously exposed.” (Klein, ...

Thornton

Additive two-color or four-color process: beam splitter and mosaic screen, films
In this process, two positives, one orange-red one blue-green, were cemented together. Several specifications and modifications exist, for instance the strengthening of the perforated film margins via a second exposure, in an attempt to overcome wear ...

Pantachrom

Subtractive 3 color: Bi-pack and lenticular film recording, duplitized film with toning and silver dye-bleach
“In October, Eggert of the Agfa Research Department, read a paper at the Berlin meeting of the Deutsche Gesellschaft für photographische Forschung, on the Pantochrom subtractive lenticular bipack tricolor process. (Fig. 1) The green and blue ...

19 Images in 3 Galleries