Procédé Tetrachrome

Additive four-color process: rotating filters
Based on four primary colors, the process successively recorded two simultaneous images for two primary colors each. In projection, the four images were combined on screen, supposedly via a regular projector.

Dufaycolor

Additive 3 color: Line screen (réseau), 35 mm and 16 mm, reversal and negative-positive stock

Dufaycolor was a regular line screen process whereby the incident light was filtered through a pattern of tiny color patches created by lines in red, green and blue, the so called réseau.

231 Images in 9 Galleries

Spicer-Dufay

Additive 3 color: Line screen (réseau), 35 mm reversal
For a description of Spicer-Dufay see detail page on Dufaycolor)

78 Images in 2 Galleries

Dufaycolor reversal

Additive 3 color: Line screen (réseau), 16 mm, reversal
(see detail page on Dufaycolor)

Versicolor-Dufay

Additive 3 color: Line screen plate, still photography
“The most successful of all the screen processes was the one initiated by Louis Dufay. Today the product is known as Dufaycolor, but it was first introduced about 1910 as the Dioptichrome plate. The first Dufay patents were assigned to an ...

Dufay / Dioptichrome Plate (sometimes incorrectly referenced as Dioptochrome)

Additive 2-4 color: Line screen plate (réseau), still photography and early experiments with film
(see detail page on Dufaycolor)

10 Images

Proposal of a variety of processes of three-color photography

Theory: still photography
“Louis Ducos du Hauron is reported to have become interested in the reproduction of colors by photography in 1859, when he was twentyone years old (Potonniée, 1939). In 1862 he submitted to a friend of his family, M. Lelut, a paper embodying ...

2 Images

Kodachrome

Subtractive 3 color: Chromogenic monopack, reversal, 8 and 16 mm

“In 1930 Mannes and Godowsky were invited to join the staff of the Kodak Research Laboratory, where they concentrated on methods of processing multilayer films, while their colleagues worked out ways of manufacturing them. The result was the new Kodachrome film, launched in 1935. Three very thin emulsion layers were coated on film base, the emulsions being sensitised with non-wandering dyes to red, green and blue light, the red-sensitive layer being at the bottom.” (Coe, Brian (1978): Colour Photography. The First Hundred Years 1840-1940. London: Ash & Grant, pp. 121 ff.)

92 Images in 6 Galleries

Telco Color, additive 2 color

Additive 2 color: Split optics, side by side

Telco color subtractive 2 color

Subtractive 2 color: Split optics, side by side, duplitized film

1 Image

Gaumont Chronochrome

Additive 3 color: Sawn-off lenses and filters, simultaneous taking and projection
“The competition between Kinemacolor and other rival systems was partially stimulated by a Utopian faith in the potential of film technology to achieve ‘natural colour’, reality ‘as it is’ being the goal of the cinematic ...

12 Images in 2 Galleries

Douglass Color No. 1

Additive 2 color: Rotary filter
“This two-color additive system for color cinematography was invented in 1916 by Leon Forrest Douglass of San Rafael, California. A special beam splitter camera would advance each roll of film two frames per exposure with its double frame pull down ...

3 Images

Douglass Color No. 2

Subtractive 2 color: Separations, multi-layer prints
“Douglass Color No. 2 (1919). The two negatives of the Douglass Color system No. 1 were printed on a positive. In this updated version of the process, rather than projecting the frames through red and green filters, both latent images were ...

Pinatype / Pinatypie

Subtractive 3 color: Dye transfer, still photography
“In the imbibition process, a dye image is transferred from a gelatin relief image to a receiving layer made either of paper or film. Charles Cros described this method of “hydrotypie” transfer printing in 1880 and suggested it ...

4 Images

Fullcolor

Subtractive 2 colors: Bi-pack, duplitized film

Dascolour

Subtractive 2 color: Bi-pack, double-coated print

1 Image

Ufacolor

Subtractive 2 color: Bi-pack, mordant toning

136 Images in 7 Galleries

Konicolor

Subtractive 3 color

“The Konicolor system, introduced by Konishiroku Shashin Kogyo (Now Konica Minolta Holdings, Inc.), split the image into three colors and shot them separately onto three b&w films. In that sense it had something in common with the US ‘Technicolor system’, but this was not a contact print with color dye to create positive film, but used coated emulsion to develop each color in a triple process, which is peculiar. […].”

Katachromie

Subtractive 3 color: Monopack silver dye-bleach, still photography
Karl Schinzel proposed a multi-layered monopack for still photography, based on the principle of the dye-bleach process which was later elaborated to a practical application with Gasparcolor.

Joly

Additive 3 color: Line screen process, still photography
“In 1894 Professor John Joly of Dublin patented a process for producing a screen of red, green and blue-violet lines by ruling them on a gelatin-coated glass plate. Joly used ruling machines of great accuracy, with drawing pens trailed across ...

7 Images

Monopack stripping

Subtractive 3 color: Monopack, stripping, still photography
“To offset the possible effects of poor contact between the various members of the tripack, J. H. Smith coated the emulsions directly one on top of the other, but with an insulating layer of collodion between them. In this manner there was ...

1 Image

Warner-Powrie

Additive 3 color: Line screen
“The Warner-Powrie process patented in 1905 was the earliest commercial process using a screen made with bichromated colloid. A glass plate was thinly coated with bichromated gelatin or fish glue and exposed to light through a screen having ...

Kodachrome Two-color 1915, after 1930 renamed Fox Nature Color

Subtractive 2 color process: Beam-splitter, double-coated film

The Kodachrome process was invented in 1913 by John G. Capstaff for still photography and subsequently adapted to motion pictures. For the process two frames were advanced simultaneously, one located above the other. The light passed either through two lenses or through a beam-splitter, fitted with red and green filters. The release print was exposed through a beam-splitter whereby the alternate frames were projected onto either side of double-coated stock. After development by a usual b/w process, the film was tanned to harden the exposed areas. The soft areas were dyed red-orange and blue-green respectively.

350 Images in 12 Galleries

Pantachrom

Subtractive 3 color: Bi-pack and lenticular film recording, duplitized film with toning and silver dye-bleach
“In October, Eggert of the Agfa Research Department, read a paper at the Berlin meeting of the Deutsche Gesellschaft für photographische Forschung, on the Pantochrom subtractive lenticular bipack tricolor process. (Fig. 1) The green and blue ...

19 Images in 3 Galleries

Thornton

Additive two-color or four-color process: beam splitter and mosaic screen, films
In this process, two positives, one orange-red one blue-green, were cemented together. Several specifications and modifications exist, for instance the strengthening of the perforated film margins via a second exposure, in an attempt to overcome wear ...

Szczepanik

Additive 3 color: Moving lenses
“The process of J. Szczepanik in 1925 was impracticable. He used a non-intermittent camera having a chain of eighteen lenses moving together with the film behind a collimating lens, three pictures being simultaneously exposed.” (Klein, ...

Color theory

Additive 3 color: Additive 3 color, still photography
“In a lecture on the theory of three primary colors, given at the Royal Institution of Great Britain on May 17, 1861, Maxwell presented the first demonstration of a photograph in color. According to the records of that meeting (Maxwell, 1890c, ...

1 Image

British Tricolour / Dufaychrome

Subtractive 3 color: Beam-splitter, three-strip, multiple printing

19 Images in 3 Galleries

Harriscolor

Subtractive 2 color: Beam-splitter, single-coated
“Harriscolor In this method as in other methods of color photography, independent color value negatives are first obtained. The Harriscolor process can employ one of the following two methods: Either a camera wherein the dividing light prisms ...

3 Images

Orthochromatic stock

b/w photography: Orthochromatic b/w stock
“In 1873 Dr Vogel discovered that by adding dyes to the sensitive material, its sensitivity could be extended, so that it would record green as well as blue. The new ‘orthochromatic’ plates were available commercially from 1882. The ...

2 Images

Sensitizing theory

Color theory
“Dr. H. W. Vogel, the discoverer of colour sensitizers, made three-colour photography possible, and has been the first to recognise the relation between colour sensitiveness of plate and printing colour in the following principle made known in ...

Isensee

Additive 3 color: Rotary filter
“The first patent that has been found was granted to H. Isensee and he placed in front of the lens, both in taking and projection, a rotary shutter with three 120 degrees sectors in the usual colors.” (Wall, E.J. (1925): The History of ...

2 Images

Technicolor No. I

Additive 2 color: Beam-splitter

During the capturing of the film a beam-splitter in combination with filters in the camera divided the incoming light into a red and a green separation negative on black-and-white stock. When projected in the cinema the two images were combined simultaneously by additive mixture through corresponding red and green filters into one picture consisting of red and green colored light. The reduction of the whole color range to two colors (and their additive combinations) was necessary because of the complex optical arrangement.

6 Images in 1 Gallery

Urban-Joy Process, improvement of Kinemacolor, later called Kinekrom

Additive 2 color: Rotary filter
“In the design of apparatus Urban was assisted after 1905 by Henry W. Joy. The Urban-Joy perforator appeared in 1906. The Urban-Joy anti-firing device, a shutter to prevent the firing of inflammable film when projectors broke down, was another ...

Rotocolor

Additive 2 color: Rotary filter
“The Rotocolor process was an additive system for color cinematography. The process was announced in 1931 by H. Muller. According to an article in Film Daily, April 12, 1931, and The Motion Picture Herald, April 11, 1931, the process consisted of ...

Chromart Simplex

Subtractive 2 color: Chromogenic monopack

Chromart Tricolor

Subtractive 3 color: Chromogenic monopack

Gualtierotti or Cicona e Gualtierotti

Additive two-color: optical system, filters, 64mm negative.
Unlike other additive systems invented in previous years, Gualtierotti tried to avoid the phenomenon of chromatic aberration inherent in the use of multiple lenses or the creation of successive separation records. The proposed solution was based on ...

1 Image

Agfacolor lenticular / Agfacolor Linsenrasterfilm

Additive 3 color: Lenticular screen
The basic idea of the lenticular film was developed by the German Raphaël Liesegang in 1896 and applied to still photography by the French Rodolphe Berthon in 1908. The lenticular process applies tiny cylindrical lenses embossed on the film support ...

15 Images

Hirlicolor

Subtractive 2 color: Bi-pack

2 Images

Kinemacolor

Additive 2 color: Rotary filter

Kinemacolor was an additive process operated with alternating red and green filters that were applied to the shutter in front of the camera and in front of the projector. With at least 32 fps the frame rate was double the minimal frame rate of 16 fps. Time parallax with small differences between the red and green record resulted in color fringes that became visible when objects or scenes were moving.

13 Images in 3 Galleries

Predecessor of Kinemacolor

Additive 2 color: Rotary filter
“Then we come upon the name of George Albert Smith, F.R.A.S., of Laboratory Lodge, Roman Crescent, Southwick, Brighton, who in E.P. 26,671, of 1906, patented the method which eventually was commercialized as Kinemacolor. In this patent he ...

3M Posi-Tone

Subtractive 3 color: dye destruction process, silver dye-bleach, still photography
“In 1956, after the failure of the French venture, Gaspar resumed his own production of printing materials and chemicals (Koshofer 1981a). In the late 1950s he entered into an agreement with 3M Company of St. Paul, Minnesota, to explore the ...

Lippmann

Direct color photography: Interference, still photography
“In 1891, Professor Gabriel Lippmann demonstrated to the French Académie des Sciences interference colour photographs of the spectrum and of stained glass windows, taken by a modification of Wiener’s method. An exceedingly fine grained, ...

5 Images

Crosene Process

Additive 4 color: Bi-pack, substandard

Lee and Turner

Additive 3 color: Rotary filter
“Frederick Marshall Lee, of Walton, and Edward Raymond Turner, of Hounslow, to whom is usually accorded the credit of achieving the first practical results in additive projection. Their experimental work was financed by Charles Urban, a ...

16 Images in 1 Gallery

Gilmore Color

Additive 2 color: Rotary filter
“Gilmore’s two-color additive process was based on a patent granted to F. E. Ives in 1918. A unique optical system exposed two images in pairs, and quarter-turned them lengthwise side by side on standard 35 mm film stock. One of the images was ...

1 Image

Iriscolor

Subtractive 3 color: Beam-splitter camera, imbibition printing
Similar to Technicolor, the Iriscolor process needed a special beam-splitter camera for exposing three black-and-white negatives on Kodak film stock. These negatives were used for imbibition printing. Between 1940 and 1942, Tobis Tonbild-Syndikat AG ...

Donisthorpe

Additive two color process: rotating filters and toning
The film is recorded through alternating red and green filters, creating two color separations. After development, the print is placed in two alternating dye-baths, toning the blacks green and the whites red. Additionally, a black-and-white copy is ...

Procédé Colombier

Subtractive 3 color: Tri-pack
“M. F. de Colombier appears to have been the first to suggest the application of this system to cinematography, and like so many French patents it is a little indefinite in phraseology. Three films were employed representing the same view and ...