Agfacolor Screen Plate

Additive 3 color: Mosaic screen, still photography
“During the war, an important new screen plate appeared, based on patents taken out by J. H. Christensen in 1908. He proposed to make a concentrated solution of gum in alcohol. Divided into three parts, the gum solutions were dyed red, green ...

7 Images

Handschiegl / DeMille-Wyckoff / Wyckoff Process

Applied color: Imbibition
Similar to stenciling, the Handschiegl process was applied mechanically to manually defined image parts. Therefore it is an applied color process. After the film was shot and edited, for each color applied a separate print was made. In contrast to ...

141 Images in 8 Galleries

Douglass Color No. 1

Additive 2 color: Rotary filter
“This two-color additive system for color cinematography was invented in 1916 by Leon Forrest Douglass of San Rafael, California. A special beam splitter camera would advance each roll of film two frames per exposure with its double frame pull down ...

3 Images

Talkicolor

Additive 2 color: Alternately stained
“Two-colour additive process Talkicolor was developed by Percy James Pearce along with Dr Anthony Bernardi who was also involved in the development of Raycol. The process was funded mainly by the author Elinor Glyn through her company Elinor ...

3 Images in 1 Gallery

Panchromotion

Additive 4 color: Rotary filter
”Kelley’s first color process was a four-color additive system introduced in 1913. Called Panchromotion, Kelley formed a company which would exploit the process commercially and, he hoped, provide strong competition for Kinemacolor. He apparently ...

2 Images

Versicolor-Dufay

Additive 3 color: Line screen plate, still photography
“The most successful of all the screen processes was the one initiated by Louis Dufay. Today the product is known as Dufaycolor, but it was first introduced about 1910 as the Dioptichrome plate. The first Dufay patents were assigned to an ...

Kesdacolor

Subtractive 2 color: Line screen filter, duplitized film stock
”The process as illustrated in USP 1431309 was a two-color additive process, but it is stated that it could be a three- or four-color process. For the original photography, the negative was exposed through a line screen composed of alternate bands ...

1 Image

Polychromide

Subtractive 2 color: Beam-splitter, later bi-pack, mordant dye
“Polychromide, a two-color subtractive process invented in 1918 by Aron Hamburger, achieved limited commercial success overseas, and was occasionally employed in England as late as 1933. Originally an orthochromatic and a panchromatic negative were ...

62 Images in 2 Galleries

Gilmore Color

Additive 2 color: Rotary filter
“Gilmore’s two-color additive process was based on a patent granted to F. E. Ives in 1918. A unique optical system exposed two images in pairs, and quarter-turned them lengthwise side by side on standard 35 mm film stock. One of the images was ...

1 Image

Prizma II

Subtractive 2 color: Toning on double coated film
“In its final form Prizma made use of duplitized positive film. As in previous Prizma systems, the original negatives were alternate frame sequential exposures. The Prizma negative was printed on both sides of the positive film in a special ...

394 Images in 14 Galleries

Douglass Color No. 2

Subtractive 2 color: Separations, multi-layer prints
“Douglass Color No. 2 (1919). The two negatives of the Douglass Color system No. 1 were printed on a positive. In this updated version of the process, rather than projecting the frames through red and green filters, both latent images were ...

Cinekrome

Additive 2 color: Beam-splitter

Zoechrome

Subtractive 3 color: Multi-layer printing

16 Images in 1 Gallery

Keller-Dorian

Additive 3 color: Lenticular screen

13 Images in 1 Gallery

Technicolor No. II

Subtractive 2 color: 2 toned films cemented

The first subtractive 2 color process introduced by Technicolor captured the incoming light through a beam splitter with red and green filters also. However, in contrast to the first Technicolor process, the two b/w images were recorded on one negative strip. This was achieved by the pull-down of two frames simultaneously, a process that required the double speed in the camera. These two frames were arranged in pairs, whereby the green record was inverted up-side down (see image).

133 Images in 8 Galleries

Traube / Uvachrome

Subtractive 3 color: Mordanting, dye transfer, wash-off relief, still photography
“In the imbibition process, a dye image is transferred from a gelatin relief image to a receiving layer made either of paper or film. Charles Cros described this method of “hydrotypie” transfer printing in 1880 and suggested it ...

3 Images

Colorcraft

Additive 2 color: Bi-pack, double-coated

21 Images in 1 Gallery

Kelleycolor

Subtractive 2 color: Dye transfer
“In 1919 Kelley produced a series of coloured cartoons which were drawn by Pinto Colvig. In 1924 he introduced “Kelleycolor,” which was an imbibition process. Two colours were imbibed on a black-and-white key image. In 1926 he ...

1 Image

Chromo-Film

Additive 3 color: Double-sized film, rotary filter

Szczepanik

Additive 3 color: Moving lenses
“The process of J. Szczepanik in 1925 was impracticable. He used a non-intermittent camera having a chain of eighteen lenses moving together with the film behind a collimating lens, three pictures being simultaneously exposed.” (Klein, ...

Thornton

Additive two-color or four-color process: beam splitter and mosaic screen, films
In this process, two positives, one orange-red one blue-green, were cemented together. Several specifications and modifications exist, for instance the strengthening of the perforated film margins via a second exposure, in an attempt to overcome wear ...

Warner-Powrie

Additive 3 color: Line screen
“The Warner-Powrie process patented in 1905 was the earliest commercial process using a screen made with bichromated colloid. A glass plate was thinly coated with bichromated gelatin or fish glue and exposed to light through a screen having ...

Wolff-Heide

additive three-color: Integrated filters and rotary filter
Much like many other additive processes, the Wolff-Heide system was based on three black and white color separations printed consecutively on one film strip and projected through a rotary filter attached to the projector. However, the biggest ...

Horst

Additive 3 color: Beam-splitter, 65 mm negative

4 Images in 1 Gallery

Spicer-Dufay

Additive 3 color: Line screen (réseau), 35 mm reversal
For a description of Spicer-Dufay see detail page on Dufaycolor)

78 Images in 2 Galleries

Auto Natural Color / Bernardi

Additive 3 color: Beam-splitter, substandard

Technic-Colour

Subtractive 2 color: Beam-splitter, duplitized

Gevaert Positif Color

Applied colors: Pretinted film

Cinecolor additive 2 color / Cinecolour

Additive 2 color: Beam-splitter, substandard

2 Images

Busch Farbenfilm

Additive 2 color: Beam-splitter, red-green

5 Images in 1 Gallery