Ulysse

Two, three or four color color additive process: multiple lenses
The process relied on two-, three- or even four-color selections being superimposed on the screen. On the positive, two, three or four images of reduced dimensions were printed on a single frame with a longitudinal and lateral distance corresponding ...

Gaumont Chronochrome

Additive 3 color: Sawn-off lenses and filters, simultaneous taking and projection
“The competition between Kinemacolor and other rival systems was partially stimulated by a Utopian faith in the potential of film technology to achieve ‘natural colour’, reality ‘as it is’ being the goal of the cinematic ...

12 Images in 2 Galleries

Colcin

Additive 2 color: Simultaneous 1 strip
“The first two-colour additive method in which the two components were taken and projected simultaneously was the Colcin process, in 1913. The result of a Franco-Japanese collaboration, it was demonstrated at the International Kinematographic ...

1 Image

Technicolor No. I

Additive 2 color: Beam-splitter

During the capturing of the film a beam-splitter in combination with filters in the camera divided the incoming light into a red and a green separation negative on black-and-white stock. When projected in the cinema the two images were combined simultaneously by additive mixture through corresponding red and green filters into one picture consisting of red and green colored light. The reduction of the whole color range to two colors (and their additive combinations) was necessary because of the complex optical arrangement.

6 Images in 1 Gallery

Szczepanik

Additive 3 color: Moving lenses
“The process of J. Szczepanik in 1925 was impracticable. He used a non-intermittent camera having a chain of eighteen lenses moving together with the film behind a collimating lens, three pictures being simultaneously exposed.” (Klein, ...

Thornton

Additive two-color or four-color process: beam splitter and mosaic screen, films
In this process, two positives, one orange-red one blue-green, were cemented together. Several specifications and modifications exist, for instance the strengthening of the perforated film margins via a second exposure, in an attempt to overcome wear ...

Gualtierotti or Cicona e Gualtierotti

Additive two-color: optical system, filters, 64mm negative.
Unlike other additive systems invented in previous years, Gualtierotti tried to avoid the phenomenon of chromatic aberration inherent in the use of multiple lenses or the creation of successive separation records. The proposed solution was based on ...

1 Image

DuChrome

Additive: spatial synthesis

Roncarolo

Subtractive 2, 3 or 4 color: Beam-splitter and bi-pack, later dye-transfer
The Roncarolo system required a camera capable of recording two panchromatic negatives (which became three or four in subsequent patents) through the use of a beam splitter and red and green filters. The chromatic information registered on the two or ...

Sistema Cristiani-Mascarini

Additive four-color: beam splitter and filters, four images on 35mm black and white film.
For this four-color process, the light beam was decomposed into four parts, each of which simultaneously exposed an area equal to one quarter of the 35mm frame of a black and white negative. This was obtained optically by placing a diaphragm and a ...

2 Images

Thomascolor

Additive 3 color: 4 images on 65 mm

5 Images

Crosene Process

Additive 4 color: Bi-pack, substandard

Telco Color, additive 2 color

Additive 2 color: Split optics, side by side

Rouxcolor 4 color

Additive 4 color: 4 lenses

7 Images in 1 Gallery

Pinchart

Additive 3 color: Four lenses, red-green-blue-grey

2 Images