Bi-pack

Subtractive 2 color: Bi-pack, still photography
A. Gurtner (Eng. P. 7924/03; U.S.P. 730454), used a front element that was sensitive only to the blue, and a rear element that was sensitive up to but not including the red. He was the first person to suggest that the two films or plates be placed ...

1 Image

Monopack stripping

Subtractive 3 color: Monopack, stripping, still photography
“To offset the possible effects of poor contact between the various members of the tripack, J. H. Smith coated the emulsions directly one on top of the other, but with an insulating layer of collodion between them. In this manner there was ...

1 Image

Jumeaux/Davidson

Additive 3 color: Prism

2 Images

Prism

Additive 3 color: Prism

1 Image

Procédé Colombier

Subtractive 3 color: Tri-pack
“M. F. de Colombier appears to have been the first to suggest the application of this system to cinematography, and like so many French patents it is a little indefinite in phraseology. Three films were employed representing the same view and ...

Audibert

Additive 3 color: Prism
“R. Berthon and M. Audibert patented a method of obtaining a virtual image by means of an anterior lens and prisms or mirrors. This idea was further improved upon in E.P. 17,023, 1913. In F.P. 458,040 Audibert proposed to use a negative front lens ...

2 Images

Colorgraph / Cinecolorgraph

Subtractive 2 color: Beam-splitter, double-coated film
“The principle of the subtractive colour process was described first by Louis Ducos du Hauron in 1868. Although eminently suitable for colour motion pictures, the principle could not be applied until means were found of producing several colour ...

1 Image

Brewster

Subtractive 2 color: Perforated mirror as beam-splitter, duplitized film
“Following the premises of one of William Friese-Greene’s systems, this two-colour subtractive process required that two reels of film be printed in parallel through a lens fitted with a prism that split light in two directions, through red ...

Kodachrome Two-color 1915, after 1930 renamed Fox Nature Color

Subtractive 2 color process: Beam-splitter, double-coated film

The Kodachrome process was invented in 1913 by John G. Capstaff for still photography and subsequently adapted to motion pictures. For the process two frames were advanced simultaneously, one located above the other. The light passed either through two lenses or through a beam-splitter, fitted with red and green filters. The release print was exposed through a beam-splitter whereby the alternate frames were projected onto either side of double-coated stock. After development by a usual b/w process, the film was tanned to harden the exposed areas. The soft areas were dyed red-orange and blue-green respectively.

350 Images in 12 Galleries

Talkicolor

Additive 2 color: Alternately stained
“Two-colour additive process Talkicolor was developed by Percy James Pearce along with Dr Anthony Bernardi who was also involved in the development of Raycol. The process was funded mainly by the author Elinor Glyn through her company Elinor ...

3 Images in 1 Gallery

Polychromide

Subtractive 2 color: Beam-splitter, later bi-pack, mordant dye
“Polychromide, a two-color subtractive process invented in 1918 by Aron Hamburger, achieved limited commercial success overseas, and was occasionally employed in England as late as 1933. Originally an orthochromatic and a panchromatic negative were ...

66 Images in 2 Galleries

Prizma II

Subtractive 2 color: Toning on double coated film
“In its final form Prizma made use of duplitized positive film. As in previous Prizma systems, the original negatives were alternate frame sequential exposures. The Prizma negative was printed on both sides of the positive film in a special ...

399 Images in 14 Galleries

Douglass Color No. 2

Subtractive 2 color: Separations, multi-layer prints
“Douglass Color No. 2 (1919). The two negatives of the Douglass Color system No. 1 were printed on a positive. In this updated version of the process, rather than projecting the frames through red and green filters, both latent images were ...

Cinekrome

Additive 2 color: Beam-splitter

Zoechrome

Subtractive 3 color: Multi-layer printing

16 Images in 1 Gallery

Technicolor No. II

Subtractive 2 color: 2 toned films cemented

The first subtractive 2 color process introduced by Technicolor captured the incoming light through a beam splitter with red and green filters also. However, in contrast to the first Technicolor process, the two b/w images were recorded on one negative strip. This was achieved by the pull-down of two frames simultaneously, a process that required the double speed in the camera. These two frames were arranged in pairs, whereby the green record was inverted up-side down (see image).

133 Images in 8 Galleries

Colorcraft

Additive 2 color: Bi-pack, double-coated

21 Images in 1 Gallery

Horst

Additive 3 color: Beam-splitter, 65 mm negative

4 Images in 1 Gallery

Technic-Colour

Subtractive 2 color: Beam-splitter, duplitized

Cinecolor additive 2 color / Cinecolour

Additive 2 color: Beam-splitter, substandard

2 Images

Auto Natural Color / Bernardi

Additive 3 color: Beam-splitter, substandard

Busch Farbenfilm

Additive 2 color: Beam-splitter, red-green

5 Images in 1 Gallery

Color Cinema Corporation

Subtractive 2 color: Bi-pack, double-coated

2 Images

Multicolor

Subtractive 2 color: Bi-pack, duplitized
“In the Multicolor (two-color) subtractive process, two negative films are run simultaneously through any standard camera with their emulsion surfaces in contact. The front negative is orthochromatic, with the surface layer dyed orange-red to ...

72 Images in 6 Galleries

Splendicolor

Subtractive 3 color: Beam-splitter, double-coated film, bichromated gelatin, Pinatype

Agfa bipack films

Subtractive 2 color: Bi-pack
AGFA BIPACK FILM The front film is orthochromatic and sensitive, therefore, to green and blue. The rear film is panchromatic and records red-orange only, there being a red-orange filter on the orthochromatic emulsion. In fact, this is a bipack of the ...

11 Images in 1 Gallery

Harriscolor

Subtractive 2 color: Beam-splitter, single-coated
“Harriscolor In this method as in other methods of color photography, independent color value negatives are first obtained. The Harriscolor process can employ one of the following two methods: Either a camera wherein the dividing light prisms ...

3 Images

Raycol

Additive 2 color: Beam-splitter, sawn-off lens

13 Images in 1 Gallery

Sirius

Subtractive 2 color: Beam-splitter, double-coated
“The Dutch Sirius Color process (1929) used a camera with a beamsplitting system behind the lens to expose a single film, the film passing through two gates at right angles to each other. The double-coated print film was dye-toned. The process ...

142 Images in 4 Galleries

Photocolor

Subtractive 2 color: Beam-splitter, double-coated

42 Images