Finlay Positive Color Screen / Finlaychrome

Additive 3 color: regular mosaic screen, combined system, still photography
“The launching of a combined version of the product called Finlaychrome was announced in 1931 but was still unavailable three years later; it is unclear if it was ever marketed.28 Instead, it seems that the company produced a viewing screen ...

3 Images

Lenticular Screen

Additive 3 color: Lenticular screen
“Every element of a cross-lined screen acts as a pinhole camera, and reproduces an image of the aperture of the objective in whose rear focal plane it is placed. Thus, when using a square stop, the dots in the halftone produced will be square ...

4 Images

Joly

Additive 3 color: Line screen process, still photography
“In 1894 Professor John Joly of Dublin patented a process for producing a screen of red, green and blue-violet lines by ruling them on a gelatin-coated glass plate. Joly used ruling machines of great accuracy, with drawing pens trailed across ...

7 Images

McDonough Color Screen

“McDonough Color Screen (1897–1900): sequence of red, yellow-green, and blue continuous lines (Fig. 2.49). Lines are thinner (approximate width 0.08 mm) and sharper than those of the Joly screen but are still visible with the naked eye or a ...

2 Images

Krayn

Additive 3 color: Line screen and mosaic, still photography
“Another method of producing a line screen was patented in 1904 by the German Robert Krayn, and was demonstrated by him in November 1907. Krayn stained very thin celluloid sheets red, green and blue, and cemented them interleaved to form a thick ...

7 Images

Caille

Additive three-color: line screen, still photography
Process for still photography in which light is filtered through a screen or transparent plate covered in lines or dots in the primary colors orange, green and violet. For the positive, the process relies on a support material which includes an ...

Autochrome

Additive 3 color: Mosaic screen, still photography
“The Autochrome process was the first fully practical single-plate colour process to reach the photographic public. It was easy to use. The plate was loaded into a conventional holder, glass to the front. The exposure was made through a yellow ...

16 Images

Berthon

Additive 3 color: Lenticular screen
“R. Berthon patented the use of a lens diaphragm with three apertures, covered respectively with red, green and blue-violet filters, and a sensitive surface on a support, the other side of which was impressed with hemi-spherical, transparent, ...

4 Images

Dufay / Dioptichrome Plate (sometimes incorrectly referenced as Dioptochrome)

Additive 2-4 color: Line screen plate (réseau), still photography and early experiments with film
(see detail page on Dufaycolor)

10 Images

Dufay / Dioptichrome

Additive 3 color: regular mosaic screen, separate system, still photography
“In 1907 the French lawyer Louis Dufay (1874-1936) patented a system whose screen pattern was obtained by the combined use of dichromated colloids, greasy printing inks, and imbibition.16 To take a photograph, the screen was mounted in a ...

1 Image

Dufay / Dioptichrome-B

Additive 3 color: regular mosaic screen, combined system, still photography
“In 1907 the French lawyer Louis Dufay (1874-1936) patented a system whose screen pattern was obtained by the combined use of dichromated colloids, greasy printing inks, and imbibition.16 To take a photograph, the screen was mounted in a ...

1 Image

Agfacolor Screen Plate

Additive 3 color: Mosaic screen, still photography
“During the war, an important new screen plate appeared, based on patents taken out by J. H. Christensen in 1908. He proposed to make a concentrated solution of gum in alcohol. Divided into three parts, the gum solutions were dyed red, green ...

11 Images

Versicolor-Dufay

Additive 3 color: Line screen plate, still photography
“The most successful of all the screen processes was the one initiated by Louis Dufay. Today the product is known as Dufaycolor, but it was first introduced about 1910 as the Dioptichrome plate. The first Dufay patents were assigned to an ...

Kesdacolor

Subtractive 2 color: Line screen filter, duplitized film stock
”The process as illustrated in USP 1431309 was a two-color additive process, but it is stated that it could be a three- or four-color process. For the original photography, the negative was exposed through a line screen composed of alternate bands ...

1 Image

Keller-Dorian

Additive 3 color: Lenticular screen

14 Images in 2 Galleries

New Agfa Color Plate

Additive 3 color: mosaic screen, combined system, still photography
“New Agfa Color Plate (1923–1932): colored particles very small and not visible to the naked eye, but clumps of particles of the same color give the image a pointillist effect (Fig. 2.62). Unlike with the autochromes, in which the grains ...

1 Image

Warner-Powrie

Additive 3 color: Line screen
“The Warner-Powrie process patented in 1905 was the earliest commercial process using a screen made with bichromated colloid. A glass plate was thinly coated with bichromated gelatin or fish glue and exposed to light through a screen having ...

Spicer-Dufay

Additive 3 color: Line screen (réseau), 35 mm reversal
For a description of Spicer-Dufay see detail page on Dufaycolor)

78 Images in 2 Galleries

Duplex Screen Plate

Additive 3 color: regular mosaic screen, still photography
“Paget plates were discontinued in the early 1920s. Apparently production costs had risen to an almost prohibitive amount after World War I due to the difficulties of producing screen plates without defect (Offer 1926). The product reemerged ...

Lignose Naturfarbenfilm

Additive 3 color: Mosaic screen

2 Images

Kodacolor / Keller-Dorian Color

Additive 3 color: Lenticular screen
“LENTICULAR PROCESS In 1896 R. E. Liesegang (Ahriman, 1896) suggested a photographic color process based upon the use of banded filters in the camera aperture. […] In 1909 R. Berthon (British Patent 10,611; see also Berthon, 1910a, b) ...

35 Images in 2 Galleries

Autochrome film / Cinécolor

Additive 3 color: Mosaic screen
Several attempts were made to apply the Autochrome process invented by the Lumière brothers to motion pictures. Transparent potato starch grains with a diameter of 15–20 micrometer were colored in the additive primaries red, green and blue. The ...

27 Images in 2 Galleries

Finlay

Additive 3 color: Regular mosaic screen, still photography

9 Images in 1 Gallery

Kislyn color

Additive 3 color: Lenticular screen

1 Image

Lumière Filmcolor

Additive 3 color: mosaic screen, combined system, still photography
“Lumière Filmcolor (1931–1953): sheet films (only) on celluloid base (Fig. 2.69). Individual colored grains cannot be seen with the naked eye, but clumps of grains of the same color give the image a pointillist effect. Filmcolor starch ...

1 Image

Agfacolor Plate

Additive 3 color: mosaic screen, combined system, still photography
“Agfacolor Plate (1932-1938): colored particles very small and not visible to the naked eye; clumps of particles of the same color give the image a pointillist effect (Fig. 2.63). Unlike with the autochromes, in which the grains are remarkably ...

1 Image

Agfacolor Film

Additive 3 color: mosaic screen, combined system, still photography
“Agfacolor Film (1932–1934): individual colored particles cannot be seen with the naked eye, but clumps of grains of the same color give the image a pointillist effect (Fig. 2.70). There is no black pigment filler. The film has a thick base ...

1 Image

Agfacolor lenticular / Agfacolor Linsenrasterfilm

Additive 3 color: Lenticular screen
The basic idea of the lenticular film was developed by the German Raphaël Liesegang in 1896 and applied to still photography by the French Rodolphe Berthon in 1908. The lenticular process applies tiny cylindrical lenses embossed on the film support ...

15 Images

Lumière Lumicolor

Additive 3 color: mosaic screen, combined system, still photography
“Lumière Lumicolor (1933–1953): rolls and pack films on celluloid base. Individual colored grains cannot be seen with the naked eye, but clumps of grains of the same color give the image a pointillist effect (Fig. 2.71). Starch grains ...

1 Image

Bocca-Rudatis

Additive 3 color: lenticular screen
The procedure for obtaining the lenticular elements in relief required a series of steps: starting from three black and white positive color separations, obtained with any of the available methods, three matrices were printed, from which the film to ...

1 Image