Fullcolor

Subtractive 2 colors: Bi-pack, duplitized film

Pinatype / Pinatypie

Subtractive 3 color: Dye transfer, still photography
“In the imbibition process, a dye image is transferred from a gelatin relief image to a receiving layer made either of paper or film. Charles Cros described this method of “hydrotypie” transfer printing in 1880 and suggested it ...

4 Images

Douglass Color No. 1

Additive 2 color: Rotary filter
“This two-color additive system for color cinematography was invented in 1916 by Leon Forrest Douglass of San Rafael, California. A special beam splitter camera would advance each roll of film two frames per exposure with its double frame pull down ...

3 Images

Douglass Color No. 2

Subtractive 2 color: Separations, multi-layer prints
“Douglass Color No. 2 (1919). The two negatives of the Douglass Color system No. 1 were printed on a positive. In this updated version of the process, rather than projecting the frames through red and green filters, both latent images were ...

Gaumont Chronochrome

Additive 3 color: Sawn-off lenses and filters, simultaneous taking and projection
“The competition between Kinemacolor and other rival systems was partially stimulated by a Utopian faith in the potential of film technology to achieve ‘natural colour’, reality ‘as it is’ being the goal of the cinematic ...

12 Images in 2 Galleries

Telco Color, additive 2 color

Additive 2 color: Split optics, side by side

Telco color subtractive 2 color

Subtractive 2 color: Split optics, side by side, duplitized film

1 Image

Kodachrome

Subtractive 3 color: Chromogenic monopack, reversal, 8 and 16 mm

“In 1930 Mannes and Godowsky were invited to join the staff of the Kodak Research Laboratory, where they concentrated on methods of processing multilayer films, while their colleagues worked out ways of manufacturing them. The result was the new Kodachrome film, launched in 1935. Three very thin emulsion layers were coated on film base, the emulsions being sensitised with non-wandering dyes to red, green and blue light, the red-sensitive layer being at the bottom.” (Coe, Brian (1978): Colour Photography. The First Hundred Years 1840-1940. London: Ash & Grant, pp. 121 ff.)

92 Images in 6 Galleries

Proposal of a variety of processes of three-color photography

Theory: still photography
“Louis Ducos du Hauron is reported to have become interested in the reproduction of colors by photography in 1859, when he was twentyone years old (Potonniée, 1939). In 1862 he submitted to a friend of his family, M. Lelut, a paper embodying ...

2 Images

Dufay / Dioptichrome Plate (sometimes incorrectly referenced as Dioptochrome)

Additive 2-4 color: Line screen plate (réseau), still photography and early experiments with film
(see detail page on Dufaycolor)

10 Images

Versicolor-Dufay

Additive 3 color: Line screen plate, still photography
“The most successful of all the screen processes was the one initiated by Louis Dufay. Today the product is known as Dufaycolor, but it was first introduced about 1910 as the Dioptichrome plate. The first Dufay patents were assigned to an ...

Dufaycolor reversal

Additive 3 color: Line screen (réseau), 16 mm, reversal
(see detail page on Dufaycolor)

Spicer-Dufay

Additive 3 color: Line screen (réseau), 35 mm reversal
For a description of Spicer-Dufay see detail page on Dufaycolor)

78 Images in 2 Galleries

Dufaycolor

Additive 3 color: Line screen (réseau), 35 mm and 16 mm, reversal and negative-positive stock

Dufaycolor was a regular line screen process whereby the incident light was filtered through a pattern of tiny color patches created by lines in red, green and blue, the so called réseau.

231 Images in 9 Galleries

Procédé Tetrachrome

Additive four-color process: rotating filters
Based on four primary colors, the process successively recorded two simultaneous images for two primary colors each. In projection, the four images were combined on screen, supposedly via a regular projector.

Rouxcolor 2 color / Cineoptichrome

Additive 2 color: Beam-splitter

2 Images

Sirius

Subtractive 2 color: Beam-splitter, double-coated
“The Dutch Sirius Color process (1929) used a camera with a beamsplitting system behind the lens to expose a single film, the film passing through two gates at right angles to each other. The double-coated print film was dye-toned. The process ...

142 Images in 4 Galleries

Horst

Additive 3 color: Beam-splitter, 65 mm negative

4 Images in 1 Gallery

Sistema Cristiani-Mascarini

Additive four-color: beam splitter and filters, four images on 35mm black and white film.
For this four-color process, the light beam was decomposed into four parts, each of which simultaneously exposed an area equal to one quarter of the 35mm frame of a black and white negative. This was obtained optically by placing a diaphragm and a ...

2 Images

Audibert

Addtive 3 color: Beam-splitter, mosaic screen, 65 mm

3 Images

Harmonicolor

Subtractive 2 color: Bi-pack, double-coated
“Harmonicoior was developed by French chemist Maurice Combes. It was first formally demonstrated in London by Harmonicoior Films Ltd, of 4 Great Winchester Street, on the 23 March 1936 at the Curzon Soho with the film Talking Hands, produced at ...

Handschiegl / DeMille-Wyckoff / Wyckoff Process

Applied color: Imbibition
Similar to stenciling, the Handschiegl process was applied mechanically to manually defined image parts. Therefore it is an applied color process. After the film was shot and edited, for each color applied a separate print was made. In contrast to ...

141 Images in 8 Galleries

Panacolor

Subtractive 3 color: Color separation, multilayer print

11 Images in 1 Gallery

Russian two-color system

Subtractive two color

1 Image

Tinting by application of varnish

Applied colors: Tinting
Very little information is available on this very rare process. Instead of immersion into a dye-bath the positive print was coated uniformly with a varnish. This technique can be identified by the lack on dyes in the perforation area and by the ...

1 Image

Cosmocolor

Additive 2 color: Beam-splitter, double-coated

2 Images

Cinemacolor

Additive 2 color: Beam-splitter, sub-standard vertical

2 Images

Prism

Additive 3 color: Prism

1 Image

Russian three-color process

Subtractive three color

6 Images

Brewster

Subtractive 2 color: Perforated mirror as beam-splitter, duplitized film
“Following the premises of one of William Friese-Greene’s systems, this two-colour subtractive process required that two reels of film be printed in parallel through a lens fitted with a prism that split light in two directions, through red ...