Agfacolor Ultra Plate

Additive 3 color: mosaic screen, combined system, still photography
“Agfacolor Ultra Plate (1936–1938): colored particles very small and not visible to the naked eye, but clumps of particles of the same color give the image a pointillist effect (Fig. 2.65). Unlike with the autochromes, in which the grains are ...

1 Image

Telco Color, additive 2 color

Additive 2 color: Split optics, side by side

Agfacolor Neu / Agfacolor

Subtractive 3 color: Chromogenic monopack, reversal (from 1936), negative/positive process (from 1939)
“The New Agfacolor Process; Agfa Ansco Corp., Binghamton, N. Y. A survey of the history of monopack or multilayer photographic color processes is given, including the coloring methods of greatest importance at the present time. These are: (a) ...

640 Images in 21 Galleries

Hirlicolor

Subtractive 2 color: Bi-pack

2 Images

Russian three-color process

Subtractive three color

6 Images

Dunning Color

Subtractive 3 color: Beam-splitter, double-coated

Carbro-Chromatone

Subtractive 3 color: pigment process, still photography
“References to Carbro-Chromatone prints are sometimes found in the literature on early color photography. These prints were made using a combination of the two processes they were named after. The method was described by Harlan L. Baumbach in ...

Pantachrom

Subtractive 3 color: Bi-pack and lenticular film recording, duplitized film with toning and silver dye-bleach
“In October, Eggert of the Agfa Research Department, read a paper at the Berlin meeting of the Deutsche Gesellschaft für photographische Forschung, on the Pantochrom subtractive lenticular bipack tricolor process. (Fig. 1) The green and blue ...

19 Images in 3 Galleries

Telco color subtractive 2 color

Subtractive 2 color: Split optics, side by side, duplitized film

1 Image

Dufaycolor reversal

Additive 3 color: Line screen (réseau), 16 mm, reversal
(see detail page on Dufaycolor)

Kodachrome Color Reversal Film Type 5262

Subtractive 3 color: Chromogenic monopack, reversal, 16 mm
Although Kodachrome 16mm reversal film was introduced as an amateur film format, rapidly after its introduction it became a format frequently used by (semi-)professional film makers. The reason was that Kodachrome was a relatively easy to use film ...

Curtis Neotone

Subtractive 3 color: dye mordanting process, still photography
“In 1939 Thomas S. Curtis of Huntington Park, California, introduced Curtis Neotone, a simple dye mordanting printing method for the production of color prints or transparencies from color separation negatives. With Curtis’s method, a ...

Curtis Orthotone

Subtractive 3 color: dye imbibition process, still photography
“In 1939 Thomas S. Curtis (1889–1964) proposed Orthotone, a dye imbibition printing method that was primarily a variation of the widely used Eastman Wash-Off Relief. Orthotone offered its practitioners complete control on the contrast or ...

1 Image

Technicolor Monopack / Kodachrome Professional Type 5267 / Eastman Monopack 7267

Subtractive 3 color: Chromogenic monopack
During the 1940s Kodachrome was used as camera material for films that were blown up to 35mm Technicolor projection prints. Technicolor used this technology from 1942 until the mid-1950s when Eastman Kodak introduced the Eastmancolor ...

Agfacolor Negative type B

Subtractive 3 color: Chromogenic monopack, daylight
For more information on the Agfacolor process see the detail page Agfacolor Neu / Agfacolor.

21 Images

Crawford Flexichrome 1940–1942, after 1949 Kodak Flexichrome

Subtractive 3 color: hybrid dye imbibition process, still photography
“In the 1940s a product called Crawford Flexichrome appeared on the market. It allowed photographers to obtain prints or transparencies in full color by simply applying dyes of various colors by hand to a gelatin relief image.16 Results ...

1 Image

Agfacolor Negative type G

Subtractive 3 color: Chromogenic monopack, Tungsten

Agfacolor Negative type G was a chromogenic camera negative balanced for Tungsten illumination.

14 Images in 2 Galleries

Iriscolor

Subtractive 3 color: Beam-splitter camera, imbibition printing
Similar to Technicolor, the Iriscolor process needed a special beam-splitter camera for exposing three black-and-white negatives on Kodak film stock. These negatives were used for imbibition printing. Between 1940 and 1942, Tobis Tonbild-Syndikat AG ...

Kodachrome Color Reversal Film 5265

Subtractive 3 color: Chromogenic monopack, reversal, 16 mm
Duplicating stock for reversal film. Replaced Kodachrome duplicating stock type 5262. Contrary to its predecessor the new stock was not suited as camera material. Type 5265 could only be used for duplication.

Agfacolor Negative type B2

Subtractive 3 color: Chromogenic monopack, daylight
For more information on the Agfacolor chromogenic process see Agfacolor Neu / Agfacolor.

37 Images in 2 Galleries

Agfacolor Negative type G2

Subtractive 3 color: Chromogenic monopack, Tungsten

Minicolor

Subtractive 3 color: dye coupling or chromogenic process, still photography
“In 1941 Kodak introduced a printing service for wallet-size Minicolor prints on a white opaque support of pigmented acetate made from 35mm transparencies (Fig. 5.6). A similar product called Kotavachrome was designed for larger prints made ...

1 Image

Dufaytissue

Subtractive 3 color: pigment process, still photography
“Dufaytissue materials, marketed by Dufay-Chromex Limited of London between 1941 and 1948, resembled Belcolor and were used to produce color prints by contact. After they had been sensitized and dried, the pigment films were exposed by contact ...

1 Image

Gaspar Color subtractive 2 color

Subtractive 2 color: Silver dye-bleach

Defender Pan-Chroma-Relief

Subtractive 3 color: dye imbibition process, still photography
“In 1942 Defender Photo Supply Company of Rochester, New York, introduced a panchromatic matrix film called Pan-Chroma-Relief Film, which simplified the making of dye imbibition prints from original Kodachrome or Ansco Color transparencies.20 ...

Kodachrome Professional Film Type 5267

Subtractive 3 color: Chromogenic monopack, reversal, 16 mm 35mm?
Kodachrome Professional was introduced in 1942 to be used as camera material. It was the Kodachrome material that was blown up to 35mm Technicolor dye transfer prints, which was the Technicolor Monopack system. According to Norris Pope this material ...

Fullcolor

Subtractive 2 colors: Bi-pack, duplitized film

Ansco Color Printon; Improved Printon Anscochrome Type / GAF Printon Type 6400 / GAF Printon Type 6410 (1956–1981)

Subtractive 3 color: dye coupling or chromogenic process, still photography
“Ansco Color Printon In 1943 Ansco followed suit and launched a printing material on white-pigmented acetate base called Ansco Color Printon (Fig. 5.7). Initially, Printon was made accessible only to the military. After 1945 it became available to ...

2 Images

Autotype Wet Carbon

Subtractive 3 color: pigment process, still photography
“Introduced by the Autotype Company in 1944, the Autotype Wet Carbon Process was a variant of the traditional carbon process with novelty wet-printing pigment papers. Considerable time was saved when printing with this material as the pigment ...

Gasparcolor Opaque

Subtractive 3 color: dye destruction process, silver dye-bleach, still photography
“In 1944 he launched a new reflection printing material on a white-pigmented acetate base called Gasparcolor Opaque, which was, initially and for the duration of the war, available only to the U.S. military. The processing of Gasparcolor Opaque ...

2 Images