Kesdacolor

Subtractive 2 color: Line screen filter, duplitized film stock
”The process as illustrated in USP 1431309 was a two-color additive process, but it is stated that it could be a three- or four-color process. For the original photography, the negative was exposed through a line screen composed of alternate bands ...

1 Image

Prizma I

Additive 3 color: Rotary filter
“The color experiments were conducted in the basement of a house at 1586 E. Seventeenth St., Brooklyn, N. Y. During this time a double-coated stock and a bleach formula which had much to do with the success of the later Prizma process were ...

Prizma II

Subtractive 2 color: Toning on double coated film
“In its final form Prizma made use of duplitized positive film. As in previous Prizma systems, the original negatives were alternate frame sequential exposures. The Prizma negative was printed on both sides of the positive film in a special ...

399 Images in 14 Galleries

Panchromotion

Additive 4 color: Rotary filter
”Kelley’s first color process was a four-color additive system introduced in 1913. Called Panchromotion, Kelley formed a company which would exploit the process commercially and, he hoped, provide strong competition for Kinemacolor. He apparently ...

2 Images

Kelleycolor

Subtractive 2 color: Dye transfer
“In 1919 Kelley produced a series of coloured cartoons which were drawn by Pinto Colvig. In 1924 he introduced “Kelleycolor,” which was an imbibition process. Two colours were imbibed on a black-and-white key image. In 1926 he ...

1 Image

Cinecolor (subtractive 2 color)

Subtractive 2 color: Bi-pack, duplitized film

93 Images in 9 Galleries

Lascelles Davidson

Additive 3 color: Rotary filter
“Apparently, associated with W. Friese-Greene, in the same year, Captain William Norman Lascelles-Davidson, also of Brighton, patented a triple lens motion picture camera (E.P. 23,863, 1898). The colour filters revolved either behind the lenses, ...

1 Image

EverColor

Subtractive 4 color: pigment process, still photography
“Also during the 1990s, William (Bill) Nordstrom started to experiment with a carbon process called Agfa-Proof, a four-color proprietary prepress color proofing system. He founded the EverColor Corporation in El Dorado Hills, California, in ...

1 Image

Biocolour

Additive 2 color: Alternately stained images
“Inevitably, the success of Kinemacolor led to the appearance of imitations. One company, Friese Greene Patents Ltd had been formed in 1908 to exploit several patents, mostly impractical, filed by Friese Greene. From this came a new company, ...

39 Images in 3 Galleries

Friese-Greene

Additive 2 or 3 color: Alternately stained

“In 1898 William Friese-Greene, a professional portrait photographer by trade, demonstrated in London ‘the first process of true natural-color cinematography.’ His program consisted of  ‘a series of animated natural-color pictures,’ and although this demonstration aroused considerable interest at the time, Friese-Greene was unable to exploit this system on a profitable basis. Undaunted, he eventually developed a total of four different color methods.”

112 Images in 2 Galleries

Agfacolor Neu / Agfacolor

Subtractive 3 color: Chromogenic monopack, reversal (from 1936), negative/positive process (from 1939)
“The New Agfacolor Process; Agfa Ansco Corp., Binghamton, N. Y. A survey of the history of monopack or multilayer photographic color processes is given, including the coloring methods of greatest importance at the present time. These are: (a) ...

640 Images in 21 Galleries

Polacolor

Subtractive 3 color: Color separation, multicolor dye images

Agfacolor Positiv Typ 5

Subtractive 3 color: Chromogenic monopack

1 Image

Trichromatic vision

Theory: Color vision
Theory of trichromatic vision proposed by Thomas Young.

Curtis Neotone

Subtractive 3 color: dye mordanting process, still photography
“In 1939 Thomas S. Curtis of Huntington Park, California, introduced Curtis Neotone, a simple dye mordanting printing method for the production of color prints or transparencies from color separation negatives. With Curtis’s method, a ...

Curtis Orthotone

Subtractive 3 color: dye imbibition process, still photography
“In 1939 Thomas S. Curtis (1889–1964) proposed Orthotone, a dye imbibition printing method that was primarily a variation of the widely used Eastman Wash-Off Relief. Orthotone offered its practitioners complete control on the contrast or ...

1 Image

Technicolor No. VI: Dye-transfer prints from enhanced process

Subtractive 3 color: dye transfer
In 1994, Technicolor announced the development of an enhanced dye-transfer process. This process became effective in  June 1997. There was no official denomination, so “Technicolor No. VI” is not to be confused with statements from the mid ...

Zoechrome

Subtractive 3 color: Multi-layer printing

16 Images in 1 Gallery

Biochrom

Additive 3 color: Double-sized film, rotary filter

Chromal Paper

Subtractive 3 color: dye coupling or chromogenic process, still photography
“In 1912, two chemists at N.P.G. in Berlin, Rudolf Fischer (1881-1957) and Hans Siegrist (1885-1959), introduced the notion of color couplers and patented the application of Homolkas discovery. Their patent described the structure and chemistry ...

Chromogenic film stock

Subtractive 3 color: Chromogenic monopack

Magnachrome

Additive 2 color: Bi-pack, half-size

Dugromacolor

Additive 3 color: Beam-splitter, substandard

1 Image

Audibert

Additive 3 color: Prism
“R. Berthon and M. Audibert patented a method of obtaining a virtual image by means of an anterior lens and prisms or mirrors. This idea was further improved upon in E.P. 17,023, 1913. In F.P. 458,040 Audibert proposed to use a negative front lens ...

2 Images

Berthon-Siemens / Siemens-Berthon / Siemens-Perutz-Verfahren / Opticolor

Additive 3 color: Lenticular screen

5 Images

Berthon

Additive 3 color: Lenticular screen
“R. Berthon patented the use of a lens diaphragm with three apertures, covered respectively with red, green and blue-violet filters, and a sensitive surface on a support, the other side of which was impressed with hemi-spherical, transparent, ...

4 Images

Mordant toning / dye toning

Applied colors: Silver replacement by mordanting
Mordant toning or dye toning is a special case of toning whereby the silver image is replaced by colored compounds. Soluble dyes attach to a colorless (silver ferrocyanide) or nearly colorless (silver iodide) silver salt obtained by bleaching. Dye ...

171 Images in 7 Galleries

Krayn

Additive 3 color: Line screen and mosaic, still photography
“Another method of producing a line screen was patented in 1904 by the German Robert Krayn, and was demonstrated by him in November 1907. Krayn stained very thin celluloid sheets red, green and blue, and cemented them interleaved to form a thick ...

7 Images

Thomascolor

Additive 3 color: 4 images on 65 mm

5 Images

Irix-Farbenfilm

Subtractive three-color process: imbibition
Three matrices in the subtractive primary colors are printed on the gelatin of the final print. Supposedly, the used dyes were particularly fast and able to prevent color bleeding. Pokorny started working on color cinematography in the 1920s, often ...

Lenticular Screen

Additive 3 color: Lenticular screen
“Every element of a cross-lined screen acts as a pinhole camera, and reproduces an image of the aperture of the objective in whose rear focal plane it is placed. Thus, when using a square stop, the dots in the halftone produced will be square ...

4 Images

Chromogenic development

Subtractive 3 color: Chromogenic development

Silver dye-bleach

Subtractive 3 color: Dye-bleach
“Probably the first use of the catalytic property of silver was in 1889, when E. Howard Farmer disclosed the action of a silver image upon strong dichromate solutions (Eng. P. 17773/89). When a plate or film, containing a silver image, is immersed ...

Ataraxia

Subtractive 4 color: pigment process, still photography
“In 1998 Racey Gilbert purchased Polaroid’s stock of pigment films and opened Ataraxia Studio in Bensalem, Pennsylvania, to make high-quality collectors’ carbon prints. Under the direction of Gérard Niemetzky, the studio produced ...

1 Image

Chimicolor

Subtractive 3 color: Beam-splitter, double-coated film, mordant toning

2 Images

Gorsky Process

Ulysse

Two, three or four color color additive process: multiple lenses
The process relied on two-, three- or even four-color selections being superimposed on the screen. On the positive, two, three or four images of reduced dimensions were printed on a single frame with a longitudinal and lateral distance corresponding ...

Fresson Quadrichromy

Subtractive 4 color: pigment process, still photography
“In 1951, when pigment processes were falling into disfavor, Pierre Fresson (1904–1983) of Atelier Fresson developed Fresson Quadrichromy, a four-color printing method based on the monochrome direct carbon process (charbon-satin) that had ...

1 Image

Talkicolor

Additive 2 color: Alternately stained
“Two-colour additive process Talkicolor was developed by Percy James Pearce along with Dr Anthony Bernardi who was also involved in the development of Raycol. The process was funded mainly by the author Elinor Glyn through her company Elinor ...

3 Images in 1 Gallery

Brewster

Subtractive 2 or 3 color: Perforated mirror as beam-splitter, duplitized film
“The Brewster Process. (U.S.P. 1,752,477. 1930-) Camera. – P. D. Brewster, an American inventor, who was one of the first to apply the bipack system to colour cinematography, has a number of patents to his credit covering various cameras and ...

52 Images in 1 Gallery

Brewster

Subtractive 2 color: Perforated mirror as beam-splitter, duplitized film
“Following the premises of one of William Friese-Greene’s systems, this two-colour subtractive process required that two reels of film be printed in parallel through a lens fitted with a prism that split light in two directions, through red ...

Russian three-color process

Subtractive three color

6 Images

Autotype Dyebro

Subtractive 3 color: dye imbibition process, still photography
“Autotype Dyebro Introduced around the same time as Colorsnap and Uvatype, Autotype Dyebro combined the three-color carbro and dye imbibition processes. The method was invented by Owen Wheeler (1859–1932) and commercialized by the Autotype ...

Prism

Additive 3 color: Prism

1 Image

Cinemacolor

Additive 2 color: Beam-splitter, sub-standard vertical

2 Images

Cosmocolor

Additive 2 color: Beam-splitter, double-coated

2 Images

Tinting by application of varnish

Applied colors: Tinting
Very little information is available on this very rare process. Instead of immersion into a dye-bath the positive print was coated uniformly with a varnish. This technique can be identified by the lack on dyes in the perforation area and by the ...

1 Image

Russian two-color system

Subtractive two color

1 Image

Panacolor

Subtractive 3 color: Color separation, multilayer print

11 Images in 1 Gallery

Handschiegl / DeMille-Wyckoff / Wyckoff Process

Applied color: Imbibition
Similar to stenciling, the Handschiegl process was applied mechanically to manually defined image parts. Therefore it is an applied color process. After the film was shot and edited, for each color applied a separate print was made. In contrast to ...

141 Images in 8 Galleries

Harmonicolor

Subtractive 2 color: Bi-pack, double-coated
“Harmonicoior was developed by French chemist Maurice Combes. It was first formally demonstrated in London by Harmonicoior Films Ltd, of 4 Great Winchester Street, on the 23 March 1936 at the Curzon Soho with the film Talking Hands, produced at ...

Audibert

Addtive 3 color: Beam-splitter, mosaic screen, 65 mm

3 Images

Lumière Alticolor

Additive 3 color: mosaic screen, combined system, still photography
“Lumière Alticolor (1952–1955): rolls and pack films on celluloid base. Alticolor starch grains are smaller but of less regular shape than those used in Filmcolor (Fig. 2.74). There are no black pigment particles; therefore, Alticolor ...

1 Image

Lumière Filmcolor

Additive 3 color: mosaic screen, combined system, still photography
“Lumière Filmcolor (1931–1953): sheet films (only) on celluloid base (Fig. 2.69). Individual colored grains cannot be seen with the naked eye, but clumps of grains of the same color give the image a pointillist effect. Filmcolor starch ...

1 Image

Lumière Lumicolor

Additive 3 color: mosaic screen, combined system, still photography
“Lumière Lumicolor (1933–1953): rolls and pack films on celluloid base. Individual colored grains cannot be seen with the naked eye, but clumps of grains of the same color give the image a pointillist effect (Fig. 2.71). Starch grains ...

1 Image

Sistema Cristiani-Mascarini

Additive four-color: beam splitter and filters, four images on 35mm black and white film.
For this four-color process, the light beam was decomposed into four parts, each of which simultaneously exposed an area equal to one quarter of the 35mm frame of a black and white negative. This was obtained optically by placing a diaphragm and a ...

2 Images

Horst

Additive 3 color: Beam-splitter, 65 mm negative

4 Images in 1 Gallery

Sirius

Subtractive 2 color: Beam-splitter, double-coated
“The Dutch Sirius Color process (1929) used a camera with a beamsplitting system behind the lens to expose a single film, the film passing through two gates at right angles to each other. The double-coated print film was dye-toned. The process ...

142 Images in 4 Galleries

Rouxcolor 2 color / Cineoptichrome

Additive 2 color: Beam-splitter

2 Images

Procédé Tetrachrome

Additive four-color process: rotating filters
Based on four primary colors, the process successively recorded two simultaneous images for two primary colors each. In projection, the four images were combined on screen, supposedly via a regular projector.

Kodak Dye Transfer

Subtractive 3 color: dye imbibition process, still photography
“Kodak Dye Transfer materials were introduced by Eastman Kodak Company in February 1946 and replaced Eastman Wash-Off Relief. Principal improvements over the previous material included a simplified registration procedure, more rapidly ...

1 Image

Condax-Dytrol

Subtractive 3 color: dye imbibition process, still photography
“Around 1940, Condax-Speck, Inc., of New York started to market dyes and mordant for the Condax-Dytrol system of dye imbibition printing (Fig. 4.19). The system, developed by company owners Louis M. Condax (1897–1971) and Robert P. Speck, ...

Dufaycolor

Additive 3 color: Line screen (réseau), 35 mm and 16 mm, reversal and negative-positive stock

Dufaycolor was a regular line screen process whereby the incident light was filtered through a pattern of tiny color patches created by lines in red, green and blue, the so called réseau.

231 Images in 9 Galleries

Spicer-Dufay

Additive 3 color: Line screen (réseau), 35 mm reversal
For a description of Spicer-Dufay see detail page on Dufaycolor)

78 Images in 2 Galleries

Dufaycolor reversal

Additive 3 color: Line screen (réseau), 16 mm, reversal
(see detail page on Dufaycolor)

Versicolor-Dufay

Additive 3 color: Line screen plate, still photography
“The most successful of all the screen processes was the one initiated by Louis Dufay. Today the product is known as Dufaycolor, but it was first introduced about 1910 as the Dioptichrome plate. The first Dufay patents were assigned to an ...

Dufay / Dioptichrome Plate (sometimes incorrectly referenced as Dioptochrome)

Additive 2-4 color: Line screen plate (réseau), still photography and early experiments with film
(see detail page on Dufaycolor)

10 Images

Dufay / Dioptichrome

Additive 3 color: regular mosaic screen, separate system, still photography
“In 1907 the French lawyer Louis Dufay (1874-1936) patented a system whose screen pattern was obtained by the combined use of dichromated colloids, greasy printing inks, and imbibition.16 To take a photograph, the screen was mounted in a ...

1 Image

Dufay / Dioptichrome-B

Additive 3 color: regular mosaic screen, combined system, still photography
“In 1907 the French lawyer Louis Dufay (1874-1936) patented a system whose screen pattern was obtained by the combined use of dichromated colloids, greasy printing inks, and imbibition.16 To take a photograph, the screen was mounted in a ...

1 Image

Proposal of a variety of processes of three-color photography

Theory: still photography
“Louis Ducos du Hauron is reported to have become interested in the reproduction of colors by photography in 1859, when he was twentyone years old (Potonniée, 1939). In 1862 he submitted to a friend of his family, M. Lelut, a paper embodying ...

2 Images

Kwik-Print

Subtractive 3 color: pigment process, still photography
“In 1977 Light Impressions Corporation of Rochester, New York, introduced Kwik-Print, a contact speed color printing material. This was a modification of the Kwik-Proof graphic arts proofing system made by Direct Reproductions Corporation of ...

1 Image

Kodachrome

Subtractive 3 color: Chromogenic monopack, reversal, 8 and 16 mm

“In 1930 Mannes and Godowsky were invited to join the staff of the Kodak Research Laboratory, where they concentrated on methods of processing multilayer films, while their colleagues worked out ways of manufacturing them. The result was the new Kodachrome film, launched in 1935. Three very thin emulsion layers were coated on film base, the emulsions being sensitised with non-wandering dyes to red, green and blue light, the red-sensitive layer being at the bottom.” (Coe, Brian (1978): Colour Photography. The First Hundred Years 1840-1940. London: Ash & Grant, pp. 121 ff.)

92 Images in 6 Galleries

Telco Color, additive 2 color

Additive 2 color: Split optics, side by side

Telco color subtractive 2 color

Subtractive 2 color: Split optics, side by side, duplitized film

1 Image

Gaumont Chronochrome

Additive 3 color: Sawn-off lenses and filters, simultaneous taking and projection
“The competition between Kinemacolor and other rival systems was partially stimulated by a Utopian faith in the potential of film technology to achieve ‘natural colour’, reality ‘as it is’ being the goal of the cinematic ...

12 Images in 2 Galleries

Douglass Color No. 1

Additive 2 color: Rotary filter
“This two-color additive system for color cinematography was invented in 1916 by Leon Forrest Douglass of San Rafael, California. A special beam splitter camera would advance each roll of film two frames per exposure with its double frame pull down ...

3 Images

Douglass Color No. 2

Subtractive 2 color: Separations, multi-layer prints
“Douglass Color No. 2 (1919). The two negatives of the Douglass Color system No. 1 were printed on a positive. In this updated version of the process, rather than projecting the frames through red and green filters, both latent images were ...

Pinatype / Pinatypie

Subtractive 3 color: Dye transfer, still photography
“In the imbibition process, a dye image is transferred from a gelatin relief image to a receiving layer made either of paper or film. Charles Cros described this method of “hydrotypie” transfer printing in 1880 and suggested it ...

4 Images

Fullcolor

Subtractive 2 colors: Bi-pack, duplitized film

Dascolour

Subtractive 2 color: Bi-pack, double-coated print

1 Image

Ufacolor

Subtractive 2 color: Bi-pack, mordant toning

136 Images in 7 Galleries

Konicolor

Subtractive 3 color

“The Konicolor system, introduced by Konishiroku Shashin Kogyo (Now Konica Minolta Holdings, Inc.), split the image into three colors and shot them separately onto three b&w films. In that sense it had something in common with the US ‘Technicolor system’, but this was not a contact print with color dye to create positive film, but used coated emulsion to develop each color in a triple process, which is peculiar. […].”

Katachromie

Subtractive 3 color: Monopack silver dye-bleach, still photography
Karl Schinzel proposed a multi-layered monopack for still photography, based on the principle of the dye-bleach process which was later elaborated to a practical application with Gasparcolor.

Johnsons Colour Screen

Additive 3 color: regular mosaic screen, separate system, still photography
“Johnsons Colour Screen (1953–ca. 1954): pattern virtually identical to Paget Color Screen, with lines of red and blue squares alternated with lines of green and blue squares, approximately 350 to the inch (Fig. 2.55). The lines are at a ...

1 Image

Joly

Additive 3 color: Line screen process, still photography
“In 1894 Professor John Joly of Dublin patented a process for producing a screen of red, green and blue-violet lines by ruling them on a gelatin-coated glass plate. Joly used ruling machines of great accuracy, with drawing pens trailed across ...

7 Images

Monopack stripping

Subtractive 3 color: Monopack, stripping, still photography
“To offset the possible effects of poor contact between the various members of the tripack, J. H. Smith coated the emulsions directly one on top of the other, but with an insulating layer of collodion between them. In this manner there was ...

1 Image

Warner-Powrie

Additive 3 color: Line screen
“The Warner-Powrie process patented in 1905 was the earliest commercial process using a screen made with bichromated colloid. A glass plate was thinly coated with bichromated gelatin or fish glue and exposed to light through a screen having ...

Kodachrome Two-color 1915, after 1930 renamed Fox Nature Color

Subtractive 2 color process: Beam-splitter, double-coated film

The Kodachrome process was invented in 1913 by John G. Capstaff for still photography and subsequently adapted to motion pictures. For the process two frames were advanced simultaneously, one located above the other. The light passed either through two lenses or through a beam-splitter, fitted with red and green filters. The release print was exposed through a beam-splitter whereby the alternate frames were projected onto either side of double-coated stock. After development by a usual b/w process, the film was tanned to harden the exposed areas. The soft areas were dyed red-orange and blue-green respectively.

350 Images in 12 Galleries

Pantachrom

Subtractive 3 color: Bi-pack and lenticular film recording, duplitized film with toning and silver dye-bleach
“In October, Eggert of the Agfa Research Department, read a paper at the Berlin meeting of the Deutsche Gesellschaft für photographische Forschung, on the Pantochrom subtractive lenticular bipack tricolor process. (Fig. 1) The green and blue ...

19 Images in 3 Galleries

Thornton

Additive two-color or four-color process: beam splitter and mosaic screen, films
In this process, two positives, one orange-red one blue-green, were cemented together. Several specifications and modifications exist, for instance the strengthening of the perforated film margins via a second exposure, in an attempt to overcome wear ...

Duxochrome / Colorstil / Duxocolor

Subtractive 3 color: pigment process, still photography
“Duxochrome, introduced around 1930 by the Johannes Herzog Company of Bremen, Germany, combined the colored gelatin layers of pigment processes with the tanning development procedure of dye imbibition. Exposures from three separation negatives ...

1 Image

Szczepanik

Additive 3 color: Moving lenses
“The process of J. Szczepanik in 1925 was impracticable. He used a non-intermittent camera having a chain of eighteen lenses moving together with the film behind a collimating lens, three pictures being simultaneously exposed.” (Klein, ...

McDonough Color Screen

“McDonough Color Screen (1897–1900): sequence of red, yellow-green, and blue continuous lines (Fig. 2.49). Lines are thinner (approximate width 0.08 mm) and sharper than those of the Joly screen but are still visible with the naked eye or a ...

2 Images

Color theory

Additive 3 color: Additive 3 color, still photography
“In a lecture on the theory of three primary colors, given at the Royal Institution of Great Britain on May 17, 1861, Maxwell presented the first demonstration of a photograph in color. According to the records of that meeting (Maxwell, 1890c, ...

1 Image

Crawford Flexichrome 1940–1942, after 1949 Kodak Flexichrome

Subtractive 3 color: hybrid dye imbibition process, still photography
“In the 1940s a product called Crawford Flexichrome appeared on the market. It allowed photographers to obtain prints or transparencies in full color by simply applying dyes of various colors by hand to a gelatin relief image.16 Results ...

1 Image

British Tricolour / Dufaychrome

Subtractive 3 color: Beam-splitter, three-strip, multiple printing

19 Images in 3 Galleries

Harriscolor

Subtractive 2 color: Beam-splitter, single-coated
“Harriscolor In this method as in other methods of color photography, independent color value negatives are first obtained. The Harriscolor process can employ one of the following two methods: Either a camera wherein the dividing light prisms ...

3 Images

Ilford Colour Print

Subtractive 3 color: dye destruction process, silver dye-bleach, still photography
“In November 1953 Ilford Limited of London launched a mail-order service to supply color prints from 35mm transparencies using Ilford Colour Print, a silver dye-bleach printing material on white-pigmented cellulose triacetate support (Fig. ...

1 Image

Orthochromatic stock

b/w photography: Orthochromatic b/w stock
“In 1873 Dr Vogel discovered that by adding dyes to the sensitive material, its sensitivity could be extended, so that it would record green as well as blue. The new ‘orthochromatic’ plates were available commercially from 1882. The ...

2 Images

Sensitizing theory

Color theory
“Dr. H. W. Vogel, the discoverer of colour sensitizers, made three-colour photography possible, and has been the first to recognise the relation between colour sensitiveness of plate and printing colour in the following principle made known in ...